Kent CNC Lathes w/ Fanuc 0i Control
Features:
- Full enclosure
- Fanuc 0i CNC Control
- Programmable flood coolant
- Big 3" plug spindle through hole
- Induction hardened and ground ways
- Rigid FC30 casting with extra ribbing
- Extra large precision ground ballscrews
- Auto lube system with metered check valves
- Allow steel gears that are hardened and ground
- Spindle Speed Range: 45 - 1,800 RPM or 20 - 1,300 RPM
Complete with:
- 5 MT Tailstock
- 8" 3-Jaw Chuck
- Coolant System
- Tubular Work Light
- Roller Jaw Steady Rest
- Automatic Lube Sytem
- Manual & Parts List
- Front Access Slide-Out Chip Tray
- Full Enclosure with Sliding Front Doors as well as Side & Rear Access
- 4-Position Programmable Electric Turret
- Complete Operation Manual for Fanuc 0i CNC Control
Specifications:
| Model | KLS-1840N CNC | KLS-2660N CNC |
| Swing Over Bed | 18" | 26" |
| Swing Over Cross Slide | 9.84" | 9.05" |
| Distance Between Center | 39.4" | 59" |
| Width of Bed | 13.8” | 15.9" |
| Spindle Nose | D1-6 (Opt. ASA A1-6) | D1-8 (Opt. ASA A1-8) |
| Spindle Bore | 3" | 4" |
| Spindle Taper | M.T. #7 | M.T. #7 |
| Spindle Speeds | 45-1800 RPM | (3 Ranges) 20-150 RPM, 150-433 RPM, 433-1300 RPM |
| Tool Post Shank | - | - |
| Longitudinal Travel (Z-Axis) | 39.4" | 39.4" |
| Cross Slide Travel (X-Axis) | 10" | 14.4" |
| Rapid Traverse Speed (Z/X-Axis) | 240"/120" /min | 400"/320" /min |
| Spindle Motor | 7.5 HP | 10 HP |
| Axis Motors X/Z | 1.13 / 0.6 HP | 1.86 / 1.6 HP |
| Net Weight | 5236 lbs. | 8910 lbs. |
| Gross Weight | 5720 lbs | 9394 lbs. |
| Overall Dimension | 100" x 55" x 67" | 118" x 70.5" x 87.8" |
For more info, visit www.p65warnings.ca.gov.
