Kent USA Precision Lathe, 26" x 160" - HW-26160

Brand: Kent USA

SKU:: HW-26160

ID:: 355390

Call For Price Enable

yes

callling

$0.00

Current Stock:

Adding to cart… The item has been added

Kent USA Precision Lathe, 26" x 160" - HW-26160

Features:

15 HP spindle motor, 12-speeds
4.5" (115mm) spindle through hole
Solid one piece full length casting base and bedways for maximum rigidity
Spindle jog button control
One-shot lubrication for apron, multi-position adjustable feed position stops
Dual inch/metric calibrated tailstock
Dual inch/metric dials

Standard Accessories:

3-Jaw chuck (15")
Steady rest
Follow rest
Work light
Thread chasing dial
4 position tool post
Coolant system with full-length splash guard
4 position carriage stop

Optional Accessories:

DRO System 80" (2-axis, x=0.0001"/z=0.0005" res)* ($ 6,995.00)
DRO System 120" (2-axis, x=0.0001"/z=0.0005" res)* ($ 7,995.00)
DRO System 160" (2-axis, x=0.0001"/z=0.0005" res)* ($ 8,995.00)
DRO installation charge ($ 795.00)
Aloris DA #5-SET (Tool Post and 6 holders) ($ 3,195.00)
Royal spindle type live center (M.T. #5) ($ 1,695.00)
BTC 3-Jaw chuck w/back plate (Zero-set, 15" D1-11) ($ 4,995.00)
4-Jaw independent Chuck (16" D1-11) ($ 2,195.00)
Adaptor plate for mounting chucks at back of spindle ($ 2,495.00)
Face plate (20" D1-11) ($ 1,795.00)
Taper turning attachment* ($ 3,095.00)
Micrometer carriage stop ($ 495.00)
Rustlick coolant (1 gallon, mixes 1:30) ($ 129.95)

* Installed options may require non-refundable deposit with order

Specifications:

	Model	HW-26160
CAPACITY	Swing over bed ways	26" (660mm)
	Swing over cross slide	17.3" (440mm)
	Swing over gap	35" (890mm)
	Gap length (w/ face plate)	11.8" (300mm)
	Bed width	15.75" (400mm)
	Distance between centers	169" (4300mm)
HEADSTOCK	Spindle hole	4.5" (115mm)
	Spindle nose camlock	D1-11
	Spindle to sleeve taper	MT #7
	Spindle bore	4.5" (115mm)
	Spindle speed	12 Steps, 10-1000 RPM (bore 115mm)
CARRIAGE	Cross slide travel	14.75" (375mm)
CARRIAGE	Top slide (compound) travel	8" (200mm)
FEED BOX	Thread capacity (inches)	44, 2 - 56 TPI
	Thread capacity (metric)	39, 0.5 - 14 mm
	Leadscrew Diameter	1.5"
	Leadscrew pitch	4 TPI
	Longitudinal feeds	0.002 - 0.032 IPR
	Cross feeds	0.001 - 0.0094 IPR
TAILSTOCK	Quill diameter with tang	3.3" (85mm)
	Quill travel	6.5" (165mm)
	Quill taper	MT #5
POWER	Main motor	15 HP
	Coolant pump motor	1/8 HP
	Control circuit voltage	115 V
DIMENSION	Shipping dimension (L x W x H)	219" x 41" x 52"
WEIGHT	Net weight (approx)	10890 lbs.
WEIGHT	Gross weight (approx)	11332 lbs.

Power Requirement: 230 volts, 3-phase, 60 Hz, 50 Amp or
460 volts, 3-phase, 60 Hz, 25 Amp

* Please note: All pricing, features, and specifications are subject to change without prior notice. Pricing based FOB Tustin, California.

See all Kent USA HW-26 Series Precision Lathes

WARNING: This Product Can Expose You To Materials And/Or Chemicals Which Are Known To The State Of California To Cause Cancer And/Or Reproductive Harm.

For more info, visit www.p65warnings.ca.gov.