Large Grippall™ Three Finger CNC Bar Puller, VDI 40 - GA-MVDI403F

Brand:   Novelty Products International
SKU:
GA-MVDI403F
ID:
361283
$699.95
Current Stock:
Adding to cart… The item has been added

Novelty Products International

Large Grippall™ Three Finger CNC Bar Puller, VDI 40
GA-MVDI403F


Large Grippall™ THREE FINGER CNC Bar Puller, VDI 40


Included are a set of 3 Hard Steel Fingers and Mounting Screws.
All VDI units are internally plumbed and ready to use with CNC lathes's coolant system.
Gripping Capacity: 1/8" - 3-1/8", (2) settings:
First Setting: 1/8" to 2-1/2"
Second Setting: 3/4" to 3-1/8"
Made in U.S.A.


HOW DOES THE GRIPPALL™ CNC BAR PULLER WORK?

Introducing the patented Grippall™ CNC Bar Puller an inexpensive machine tool used to automate any CNC Lathe with coolant or air on the turret. As coolant is fed through the unit, it pushes a piston forward which causes the fingers to grip the bar stock. When the coolant is turned off, the fingers will automatically spring open. No adjustment is necessary within the entire gripping range. Pressure ranges 15 psi. to 140 psi. max.

Coolant or Air ON - Fingers Close. Coolant or Air OFF - Fingers Open (Spring Return).

Grippall™ CNC Bar Pullers provide you with a simple and very efficient Bar-Feeder, Low cost and saves valuable floor space.

The Grippall™ CNC Bar Puller is also useful as a part loader / unloader. Remove finished parts from a machine's sub-spindle or remove a bar remnant and drop in the parts catcher for disposal.

The Grippall™ CNC Bar Puller can pull a 200 lb. bar with as little as 15 psi of coolant or air pressure. Note: bar stock must be supported and move freely.


Please view video below of Grippall™ CNC Bar Puller in action!

The video shows a groove on the Bar Stock to make a precise pull. It is not necessary to make a groove to pull the bar. The Grippall™ CNC Bar Puller will work just fine without a groove.


CNC Bar Pullers are Self-Adjusting Coolant or Air actuated. It will enable the user to automate your CNC Turning Center in an inexpensive way to increase production.

Quality Design: Made of Stainless Steel and Anodized Air Craft Aluminum.


Features:

  • Mini Unit Automatically grips from 1/8" to 1 1/8" O.D. in one setting
  • Large Unit Automatically grips from 1/8" to 3 1/8" O.D. with two settings
  • Automates your CNC Turning Center to increase production
  • Bar pullers don't use up valuable floor space
  • They are very easy to set up and use – no electrical interface required
  • They can be easily moved from one machine to another
  • A wide griping range is obtained from a very compact design
  • Can be used on a variety of material shapes. Flat, Square, Round & Hex
  • Use GRIPPALL™ CNC Bar Puller as a parts picker so finished work piece doesn't get damaged
  • Grippall™ CNC Bar Pullers are also used in robotics and automation industries.
  • 1 Year Warranty


Specifications:

Item Number GA-MVDI403F
Description Large Grippall™ Three Finger CNC Bar Puller
Size VDI 40
Included Set of 3 Hard Steel Fingers and Mounting Screws
All VDI units are internally plumbed and ready to use
with CNC lathes's coolant system.
Gripping Capacity 1/8" - 3-1/8", (2) settings:
First Setting: 1/8" to 2-1/2"
Second Setting: 3/4" to 3-1/8"



See all Grippall™ CNC Bar Pullers


Warning Icon

WARNING: This Product Can Expose You To Materials And/Or Chemicals Which Are Known To The State Of California To Cause Cancer And/Or Reproductive Harm.

Large Grippall™ Three Finger CNC Bar Puller, VDI 40 - GA-MVDI403F

Large Grippall™ Three Finger CNC Bar Puller, VDI 40 - GA-MVDI403F

Large Grippall™ Three Finger CNC Bar Puller, VDI 40 - GA-MVD…

$699.95