Servo Microprocessor Controlled Quill Feed - M-0708

Servo Microprocessor Controlled Quill Feed - M-0708

The Model 708 Microprocessor Controlled Quill Feed is factory installed (or factory retrofitted) on any Servo drill press for peck drilling and reaming cycles, or routine drilling of deep holes. Fully automates hole drilling.

Features:

• Program and run all operations from the controller keyboard
• Programmable dwell, chip clearing height and variable peck depth
• Peck Steps: 0.001”-1.4” / 0.02mm-35.6mm
• Hole depth accuracy: +0.001” / 0.02mm
• Quill Travel: 1.4” / 35.6mm
• Maximum quill force: 35 Lbs. / 16 Kg
• Feed rates: 0.01-30 IPM / 0.250750mm/min
• Optional foot switch (Model 710)