Satisfaction Guaranteed - If for any reason our products do not meet your expectations, return them. Complete refund or credit will be issued for unused and unmarked items returned within 10 days of receipt. Defective items will be either replaced or repaired.
Price Protection - Penn Tool Co will NOT BE UNDERSOLD. You will not see our advertised products at a lower price or we will refund or credit the difference. All claims must be made within 30 days of purchase. Proof of claim is required.
At Penn Tool Co we work hard to make sure that each time you purchase a tool, you are completely satisfied.To us, complete customer satisfaction means:
*Today’s most Technologically Advanced Tools necessary to meet demanding production and quality control requirements.
*Competitively priced. Penn Tool Co prides itself on keeping our price low without sacrificing quality.
*Prompt courteous service. Our customer service representatives are fully trained. Product knowledge and commitment to customer service guarantees that your order is processed the same day you place it.
Even with customer service and price protection at the top of our complete customer satisfaction list, we know you want more. Our extensive inventory is yet another way to keep you satisfied. Our large selection of inventory lets us fill your order immediately and at a completion rate that is extremely high in our industry.
Look through our website. If you don’t see a tool that you require contact us and Penn Tool Co will be glad to find it for you with our signature low price guarantee.
High performance counter for Mill and Lathe applications.
|Display||7 digits and minus display|
|Connectable measuring unit||GB-ER, PL20C (Direct) / DG-B (Necessary to use the conversion adaptor which is sold separately)|
|Measuring unit input resolution||Standard： 0.1 μm, 0.5 μm, 1 μm, 5 μm, 10 μm, 1 s, 10 s, 1 min, 10 min Expanded： 100 μm, 50 μm, 25 μm, 20 μm, 2 μm, 0.05 μm, 1 degree can be added|
|Display resolution||Measuring unit input resolution or higher and diameter display (except for angle display)|
|Input signal||A/B quadrature, Z phase (Conforms to EIA-422)|
|Minimum input phase difference||100 ns|
|Quantization error||±1 count|
|Alarm Display||Measuring unit disconnected, Excess speed, Maximum display amount exceeded, Power failure, Error in stored data|
|Reset||Resettable by key switch|
|Preset||It is possible to store/call 3 kinds of numbers.|
|Reference point detection||The reference point of the measuring unit can be detected|
|Data storage||The value displayed before the power was turned off and setting values are stored|
|Linear compensation||A fixed compensation is applied to the measuring unit's count value. Compensation amount Standard: ±600 um/m (Expanded: ±1000 um/m)|
|Segmented error compensation||The movement range of the measuring unit with a reference point can be divided into a maximum of 32 sections, and error compensation is performed for each of these sections. Compensation amount: ±600 um (at each section)|
|Scaling||Scaling factor：0.100000 ～ 9.999999|
|Angle display||Can be displayed as an angle value when the Digiruler is pasted to the arc surface|
|Sleep||The display is turned off when no operations are made for a preset time. (The time can be set.)|
|Power supply||DC 12 V Rating 0.75 A Max. 1 A AC 100 V to 240 V ±10 % When using the AC adaptor PSC-22 (For U.S. only) or PSC-23 (For Europe and other countries) *Option|
|Power consumption||max.32 VA (connected at the AC adaptor.)|
|Operating Temperature||0 ～ 40°C (non condensing)|
|Storage temperature||－20 ～ 60°C (non condensing)|
|Mass||Approx. 1.5 kg|
|When the LH70 general-purpose applications or milling machine function are selected (General setting in the model type selection mode of the basic settings)|
|Display||1 axis||2 axis||3 axis|
|Multi datum point||10|
|Bolt hole circle||-||Displays coordinates for opening equidistant |
holes along the perimeter of a designated diameter
|Simple R cutting||-||Display coordinates for simple R cutting|
|Line hole||-||Displays coordinates for opening equidistant |
holes along a designated straight line
|Touch sensor||1.Hold function, 2.Load function, 3.Centering|
|When the LH70 lathe function is selected (Lathe setting in the model type selection mode of the basic settings)|
|Display||2-axis display (2-axis or 3-axis input)|
|Measuring unit input addition||2-axis addition display is available|
|Display hold||The displayed value can be held and the tool coordinate entered.|
Click to View Catalog Page
Click to View Instruction Manual
for use with: