Micro 100 Single Flute Solid Carbide Router Mills, For Aluminum or Plastic
Brand: Micro 100- ID:
- 466578
Micro 100 Single Flute Solid Carbide Router Mills, For Aluminum or Plastic
- The single-flute design of MICRO 100 router bits prevents the rubbing of chips during machining.
- The higher rake angle of these bits allows for faster material removal and ultra-fine surface finish.
- The special helix angle enhances chip evacuation, reduces cycle times, and promises a prolonged tool life.
- The router bits have a corner radius that eases the machining process.
- Solid carbide routers designed for high speed machining of aluminum and non-ferrous materials or plastic and non-ferrous applications.
- These fractional-type end mills have a cylindrical shank style and are provided with a bright surface finish.
- They have a shank diameter of -0.0001 inch or -0.0003 inch and a maximum TIR of up to 0.0005 inch.
- Tolerance_Cutting Diameter: +.000 / -.002"
- Tolerance_Shank Diameter: -.0001" / -.0003"
| Item No. | Shank Diameter | Flute Length | Overall Length |
| 21-101-200 | 1/8" | 1/4" | 1-1/2" |
| 21-101-202 | 1/8" | 1/2" | 1-1/2" |
| 21-101-204 | 3/16" | 5/8" | 2" |
| 21-101-207 | 1/4" | 1/2" | 2" |
| 21-101-212 | 1/4" | 3/8" | 2-1/2" |
| 21-101-213 | 1/4" | 3/4" | 2-1/2" |
| 21-101-214 | 1/4" | 1-1/4" | 3" |
| 21-101-215 | 3/8" | 1-1/8" | 3" |
| 21-101-217 | 1/2" | 1-1/2" | 3" |
| 21-101-300 | 1/8" | 1/4" | 1-1/2" |
| 21-101-302 | 1/8" | 1/2" | 1-1/2" |
| 21-101-304 | 3/16" | 5/8" | 2" |
| 21-101-307 | 1/4" | 1/2" | 2" |
| 21-101-312 | 1/4" | 3/8" | 2-1/2" |
| 21-101-313 | 1/4" | 3/4" | 2-1/2" |
| 21-101-314 | 1/4" | 1-1/4" | 3" |
| 21-101-315 | 3/8" | 1-1/8" | 3" |
| 21-101-317 | 1/2" | 1-1/2" | 3" |
For more info, visit www.p65warnings.ca.gov.
