Mitee-Bite Dyna-Force® Clamp - 28328
Dyna-Force® Clamps
The majority of the Dyna-Force® clamp is below the surface of the fixture which provides excellent clamp support and makes for a very low profile. The clamp jaw slides on an angle for positive downforce.
The clamp jaw is available with smooth or serrated faces.
The support surface of the Dyna-Force® clamp can be installed flush with the fixture plate or raised to hold the workpiece off the fixture, enabling drill-through.
Features:
- Incredible Clamping and Hold Down Power
- Low Profile, Compact Design
- 17-4 PH Stainless Steel
- Smooth or Serrated
- Stainless steel screws and retaining rings are available for EDM applications
PATENT NO. 5964458
Dyna-Force® Installation:
- Bore ℄ of the hole "L" distance from edge of workpiece
- Drill and tap "H" to mount clamp in pocket
- Machine counter bore if recessing clamp into fixture
- Provide a back stop to locate the part
NOTES:
- "N*" – To have rest pad flush with fixture, use the dimension provided. To have the rest pad above the fixture surface, reduce the depth accordingly.
- For dimensions I and J, use a tolerance of +.1/-0mm. For dimension L and O, use +.1/-.1mm.
Specifications - Metric:
| Part No. | 28328 |
| Clamp Jaw† & Hardness | Serrated 44RC |
| A* | 30 |
| B | 37.9 |
| C | 29 |
| D | 29.9 |
| E | 7 |
| F | 20 |
| G - Min | 4.5 |
| G - Opt. | 7.5 |
| G - Max | 10.75 |
| H | M8 or 5/16-18 |
| I | 38 |
| J | 30 |
| K | 8 |
| L | 7.05 |
| M | 7.5 |
| N | 7 |
| O | 30 |
| Clamp Travel | 3.8 |
| Drive Screw | M10x18mm |
| Key Size | 8mm |
| Max Torque | 35.3 (Ft/Lbs), 41.9 (N.m) |
| Holding Force | 3,200 (Lbs), 14234 (N.) |
| Replacement Insert** | 28490 (serrated) |
† Smooth jaw only will have relief cut
* Body diameter
** Includes screw and retaining ring
Click to View the Full Series Specifications
View the Instruction Sheet
See all Mitee-Bite Dyna-Force® Clamps
For more info, visit www.p65warnings.ca.gov.
