Omega Drill Broken Tap Removal Drill OD-1/4 - OMR-004

Brand:   Omega Drill
SKU:
OMR-004
ID:
89867
Removes Sizes 5/16",3/8",7/16",1/2",M8,M10,M12
$69.95
Current Stock:
Adding to cart… The item has been added

Omegadrill

Omega Drill Broken Tap Removal Drill OD-1/4


Features:

Use for taps  5/16", 3/8", 7/16", 1/2", M8, M10, M12

  • Removes even the most stubborn Broken Taps.
  • Revolutionary carbide grade and advanced drill point geometry.
  • Works on spiral flute, straight flute and forming taps.


How to use:

Step 1:

Remove as much as practical of any uneven broken top surface of the tap, creating a reasonably flat surface for the Omegadrill to drill into.

Step 2:

Clamp the part securely.  Use as large a diameter Omegadrill as possible to spot the broken tap.  Drill at 1,200 to 2,500 RPM on a rigid and stable machine tool such as a machining center or knee mill.

Step 3:

Using the recommended size Omegadrill, drill down through the broken tap. Drill dry or use straight cutting oil – not coolant. Peck the drill and flush chips out frequently with an air blast. Best results are achieved with using light quill hand feed on a knee mill. When reaching the bottom of the broken tap, a slight vibration will be felt. It is best to stop drilling at this point, to minimize any risk of damage to the Omegadrill’s cutting edges.

Step 4:

Using either a scriber, or the picks and pin vise supplied with the Omegadrill set, remove the remnants of the broken tap flutes.



See all Omega Drill Broken Tap Removal Drills


Warning Icon

WARNING: This Product Can Expose You To Materials And/Or Chemicals Which Are Known To The State Of California To Cause Cancer And/Or Reproductive Harm.

Omega Drill Broken Tap Removal Drill OD-1/4 - OMR-004

Omega Drill Broken Tap Removal Drill OD-1/4 - OMR-004

Omega Drill Broken Tap Removal Drill OD-1/4 - OMR-004

$69.95