Precise 10" Horizontal/Vertical Rotary Table Set - HVR-010

Precise 10" Horizontal/Vertical Rotary Table Set

• Picture shows a set including a 3 jaw chuck and rotary table with a center align pin, screws and T- slot nuts
• The 4", 6", 8", 10" chucks can be directly installed in 4", 6", 8", 10" rotary tables, and the rotary table fits on the same size of the chuck.

• 10" Horizontal Verticle Rotary Table
  
  • Table diameter: 9.84"
  • Horizontal O/A Height: 4.53"
  • Center height vertical position: 6.49"
  • Overall height in vertical position: 12.79''
  • Overall width (not including handle) in vertical position: 11.02''
  • Mounting table bolt width: 0.63''
  • T-slot width: 0.55''
  • No. of slots: 6
  • Center taper: Morse Taper 3
  • Without coolant pathway on rotary table base to catch the coolant
• Feature:
  • Low Profile
  • 10 second vernier reading
  • Gear drive immersed in oil
  • Extra deep coolant channel
  • Dual positive action locks
  • Satin chrome dials
  • Maximum individual spacing error 4" table 120", 6" table 80", 8, 10, 12, 16" tables 60"
  • 4" table utilizes low profile locks for added workspace
  • Gear ratio: 4" table is 72:1; 6-16" tables are 90:1
  • Flatness of clamping service-concave: .0006"
  • Concentricity of center bore: .0008
  • Parallelism of clamping surface to angle face: .0008"
  • Squareness of angle surface to clamping surface: .0004"
  • Squareness of clamping surface to center slot: .0008"
  • Without coolant pathway on rotary table base to catch the coolant
• 10" 3 jaw self-centering lathe chuck (PN 202-6190)
  • Diameter: 10"
  • Mounting: Front Mounting & Plain back
  • Center hole: 3.15"
  • Thickness: 3.15"
  • Bolt Circle Diameter: 8.898"
  • Runout: 0.0039"
• Feature:
  • Semi-steel chuck body made from high quality cast iron

  • Three pinion design with each pinion ground and hardened to HRC 43
  • Two piece jaw design with a master jaw and a top reversible jaw in American Standard tongue and groove specification
  • Both side of jaw teeth and guides are ground and hardened to HRC 58-62

  • Each set of jaws are serialized in their own set
  • A serialized set of jaws are then finished, ground, and lapped on their designated chuck body which will be the same chuck body on the final assembly to achieve a greater accuracy

  What's Included

  • 10" Horizontal Verticle Rotary Table
  • 10" 3 jaw self-centering lathe chuck
  • 1 center align pin
  • T-Slots Nut