Precise 1/2” Shank External Holder Size 2 Insert/Right Hand - TNSR08-2J - 22-743-418
- All purpose system for threading and grooving.
- Very strong insert design and wide selection and range.
- Clamping system draws the insert consistently back into the pocket for superior repeatability.
- Same toolholder can be used for threading and grooving.
- Fully interchangeable with other similar Top Clamp tools and inserts
- Inserts not included.
Item No. | A | B | C | D | F | E | Use Clamp Screw | Insert Clamp |
22-743-418 | 0.500" | 0.500" | 3.500" | 0.138" | 0.750" | 0.750" | S-310 | CM-74 |
22-743-419 | 0.500" | 0.500" | 4.500" | 0.138" | 0.875" | 0.750" | S-310 | CM-74 |
22-743-420 | 0.750" | 0.750" | 4.500" | 0.138" | 1.000" | 0.750" | S-310 | CM-74 |
22-743-421 | 0.750" | 0.750" | 4.500" | 0.210" | 1.000" | 1.250" | S-412 | CM-72 |
22-743-422 | 1.000" | 1.000" | 6.000" | 0.210" | 1.250" | 1.250" | S-412 | CM-72 |
22-743-423 | 1.250" | 1.250" | 6.000" | 0.210" | 1.500" | 1.250" | S-412 | CM-72 |
22-743-424 | 1.000" | 1.000" | 6.000" | 0.294" | 1.250" | 1.380" | S-412 | CM-72 |
22-743-430 | 0.750" | 0.750" | 4.500" | 0.138" | 1.000" | 0.750" | S-310 | CM-75 |
22-743-431 | 0.750" | 0.750" | 4.500" | 0.210" | 1.000" | 1.250" | S-412 | CM-73 |
22-743-432 | 1.000" | 1.000" | 6.000" | 0.210" | 1.250" | 1.250" | S-412 | CM-73 |
22-743-433 | 1.250" | 1.250" | 6.000" | 0.210" | 1.500" | 1.250" | S-412 | CM-73 |
22-743-434 | 1.000" | 1.000" | 6.000" | 0.294" | 1.250" | 1.380" | S-412 | CM-73 |
For more info, visit www.p65warnings.ca.gov.