Sloky TORX, TORX Plus and HEX Adapters

Sloky TORX, TORX Plus and HEX Adapters

• Three (3) pcs of torque adapters of the same size are packaged in a plastic case.

• The available sizes are TX6/IP6/HX6, TX7/IP7/HX7, TX8/IP8/HX8, TX9/IP9/HX9, TX10/IP10/HX10, TX15/IP15/HX15, TX20/IP20/HX20, and TX25/IP25/HX25.

• The torque adapters are good for Torx, Torx Plus and Hex systems. The corresponding torques are 5.3, 8.0, 10.6, 12.4, 17.7, 26.6, 44.3, and 48.7 In-lb, which equal to 0.6, 0.9, 1.2, 1.4, 2.0, 3.0, 5.0, and 5.5 Nm.

• These settings are the same across all the carbide manufacturers worldwide. The torque adapter has a universal 1/4" hex shank in one end to connect to the handle and a 1/4" hex slot in the other end to connect to the bit. It is 1 1/2" in length and 1/2" in diameter. The life cycle is 20,000 operations and the accuracy tolerance is +-10%.

• These torque adapters are magnetized and color coded. Sloky has extended this product line by eight custom size adapters and are packaged three (3) pcs in a plastic case.

• The available sizes are TX0.4/IP0.4/HX0.4, TX0.5/IP0.5/HX0.5, TX1.1/IP1.1/HX1.1, TX2.5/IP2.5/HX2.5, TX3.8/IP3.8/HX3.8, TX4.0/IP4.0/HX4.0, TX4.5/IP4.5/HX4.5, and TX6.0/IP6.0/HX6.0.

• The corresponding torques are 3.5, 4.4, 9.7, 22.1, 33.6, 35.4, 39.8, and 53.1 In-lb, which equal to 0.4, 0.5, 1.1, 2.5, 3.8, 4.0, 4.5, and 6.0 Nm. These settings are the same across all the carbide manufacturers worldwide. The torque adapter has a universal 1/4" hex shank in one end to connect to the handle and a 1/4" hex slot in the other end to connect to the bit. It is 1 1/2" in length and 1/2" in diameter.

• These torque adapters are magnetized. Now available, five more custom sizes and are sold individually. These particular sizes have a thicker wall and do not have a "click" sound. The sizes are as follows, TX6.5/IP6.5/HX6.5, TX7.0/IP7.0/HX7.0, TX7.5/IP7.5/HX7.5, TX7.8/IP7.8/HX7.8, and TX8.0/IP8.0/HX8.0. The corresponding torques is 57.5, 62.0, 66.4, 69.0, and 70.8 In-lb, which equal to 6.5, 7.0, 7.5, 7.8, and 8.0 Nm. These settings are the same across all the carbide manufacturers worldwide.

• The torque adapter has a universal 1/4" hex shank in one end to connect to the handle and a 1/4" hex slot in the other end to connect to the bit. It is 1 5/8" in length and 3/4" in diameter. The life cycle is 5,000 operations and the accuracy tolerance is +-10%. These torque adapters are magnetized. (US patent no. US8549963)