Victor 2400T Series Precision Heavy Duty Lathes
Brand: Victor Machinery Solutions, Inc.- ID:
- 355930
Victor 2400T Series Precision Heavy Duty Lathes
Tough built to last with large 4-1/8" spindle bore, 4-way rapid traverse, and 20 HP main motor. The best in its class to handle utmost demanding work.
Features:
- High precision hardened and ground spindle
- Hardened and precision ground induction bedways with high tension mechanize casting iron
- The spindle is supported by 3 bearings (2 taper roller bearings and one ball bearing)
- 4-1/8" large spindle bore with D1-11 camlock spindle nose
- Rapid and positive magnetic disc brake system is operated by emergency switch control or foot brake
- All running parts are lubricated by a pressure pump in gearbox
- Sliding, surfacing, and screw-cutting motions are fully interlocked in the apron
- A cone-clutch device in the apron to prevent overload
- Dual speed tailstock quill (ratio 1:1 and 1:4) provides easy drilling operation
- 4-way power rapid traverse
- Ampere meter for power consumption monitoring
- Jog button for easy spindle speed changes
- 20 HP main motor
Standard Accessories:
- Removable gap
- Tailstock with duo speed quill
- Coolant system
- Chuck cover with limit switch
- D.P. / module thread change gears
- Threading dial indicator
- Dead center M.T. #5
- Leveling screws and pads
- Manual and parts list
Machine Includes:
- Steady rest with rollers
- 4-way tool post
- Face plate
- Micro bed stop
- Halogen work light
- Chuck cover w/ limit switch
| Swing over bed | 23-5/8" |
| Swing over cross slide | 15" |
| Swing over gap | 32-1/4" |
| Bed width | 16-1/2" |
| Spindle bore diameter | 4.13" |
| Spindle bore taper | 108 x 1 : 20 |
| Taper of center in sleeve | M.T. #5 |
| Spindle nose | D1-11 |
| Number of spindle speeds | 12 Steps |
| Range of spindle speeds | 25 ~ 1,200 rpm |
| Speed selections | 25, 38, 53, 75, 108, 149, 214, 308, 424, 603, 860, 1200 |
| Range of longitudinal feeds | 0.0012" ~ 0.0287"/rev. |
| Range of cross feeds | 0.0004" ~ 0.0118"/rev. |
| Inch threads | 2 ~ 56 TPI x 45 kinds |
| Metric threads | 0.5 ~ 14 mm x 31 kinds |
| Cross slide travel | 13" |
| Compound slide travel | 8-1/4" |
| Tailstock taper center | M.T. #5 |
| Tailstock quill travel | 7" |
| Main motor | 20 HP 3 Phase |
| Coolant pump | 1/8 HP |
For more info, visit www.p65warnings.ca.gov.
