Walker C-2 Permanent Magnetic Grinding Chucks
The Walker C-2 is the most widely accepted permanent magnetic chuck in the machine tool industry. In addition to its ease of installation and operation, this Walker design offers the highest holding power available on the market. It simplifies complicated set-ups with accurate repeatability.
Uses:
- Tool room grinding
- Suitable for light milling EDM applications
Features:
- Manufactured with high power neodymium magnets
- Full magnetic surface to all edges – powerful holding over entire chuck surface
- Fine pole divisions – for more uniform magnetic holding of small parts
- Solid construction top plate – protects permanent magnetic pack from penetration of EDM fluids. Provides stronger and more rigid work surface
- Lowest height of any permanent chuck – for added clearance on larger workpieces
- Supplied with (2) hold down clamps
- Magnetic field does not affect EDM operation
- Milling finish on sides and ends
- Angled backrest and end stop
Specifications:
| Item Number | WIDTH (inch) |
LENGTH (inch) |
WIDTH (metric) |
LENGTH (metric) |
WEIGHT* |
| 68-AXM14598 | 6" | 12" | 150 mm | 300 mm | 57 lbs. (26 kg) |
| 68-AXM14600 | 6" | 18" | 150 mm | 450 mm | 86 lbs. (39.1 kg) |
| 68-AXM14601 | 8" | 15" | 200 mm | 380 mm | 100 lbs. (45.5 kg) |
| 68-AXM14602 | 8" | 18" | 200 mm | 450 mm | 114 lbs. (51.8 kg) |
| 68-AXM14603 | 10" | 15" | 250 mm | 380 mm | 125 lbs. (56.8 kg) |
| 68-AXM14605 | 12" | 18" | 300 mm | 450 mm | 172 lbs. (78.1 kg) |
| 68-AXM14606 | 12" | 24" | 300 mm | 600 mm | 237 lbs. (107.7 kg) |
* Weights are approximate net values. Shipping weights will be higher.
| 58-DD17249 | End clamp kit (1) per chuck for chucks under 10" width |
| 58-DD17250 | End clamp kit (1) per chuck for chucks 10"+ width |
For more info, visit www.p65warnings.ca.gov.
