Williams Industrial Tools 3/8" Drive MULTITORQ™ Torque Acquisition Meter Collection Sensor (10 -100 ft-lb) - 1002-F-MT2W

Williams Industrial Tools 3/8" Drive MULTITORQ™ Torque Acquisition Meter Collection Sensor (10 -100 ft-lb) - 1002-F-MT2W

The MULTITORQ portable electronic torque meter displays torque readings from sensors that attach between sockets and driver.
MULTITORQ is a highly versatile torque analyzer/data acquisition system that can be used with sockets, extensions, universal joints, ratcheting drivers or any combination of these.
Sensors are sold separately, available in 8 ranges from 2-20 in. ozs. to 150-1500 ft. lb.
Accuracy ± 1% of reading (± 2% reading for 20 in. oz., and 10 in. lb.) 10-100% of sensor range.
The torque analyzer features a wide angle viewing LCD display with selectable readouts; ft. lb., in. lb., in. oz., Nm, dNm, mkg, and cmkg units.
Torque target settings are entered via a push button membrane keyboard.
High and low torque limits are adjustable to give an audible and visual alarm.
The user selects Track mode to display torque values as they are applied, or Peak mode to display the highest torque value applied.
4 digit with alpha & numerical function flags
4 digit, 8000 counts display capacity
Accuracy: ± 1% of indicated value, cw & ccw, from 10% to 100% of full scale, 201-O-MT and 101-I-MT are ± 2%
Soft touch keys: hi/lo alarm, zero tare, set-up, units, store/recall/clear, send, statistics, enter
Units of measurement: ft. lb., in. lb., in. oz., Nm, dNm, mkg and cmkg
Storage: -20 to 50 degrees C (-2 to 122 degrees F)
Humidity: up to 90%, non-condensing
Dimensions: 3" wide, 2.5" high (3" with belt clip), 6" deep
Weight: 1 pound
Charge life (full charge to shutoff): 20 hours continuous
Battery chargers: 120 VAC
Optional 220 Volt charger available
Output: 9VDC, 200mA
Data storage/recall: 3500 measurements
Serial output port: RS-232 (true), 300-19.2k baud, and mitutoyo (statistical protocol)
Rechargeable Ni-Cad batteries
Reads bi-directionally (cw and ccw)

Features & Benefits:

• Sensor will also measure in ft lbs, in lbs, in oz, Nm, dNm, mkg, and cmkg units

Specifications: