YMW Vanadium H.S.S. NPT Taper Pipe Taps
- H.S.S. - High Speed Steel
- These general purpose taper pipe taps are ideal for threading a wide variety of materials, such as steels and irons, and can also be used for non-ferrous and non-metallic materials.
- Taps have oxide surface treatment.
- Finish Coating: Black Oxide
- All pipe taps have a chamfer of 2-1/2 to 3-1/2 threads.
- The nominal size of a pipe tap is that of the pipe fitting to be tapped, not the actual size of the tap, the thread tapers 3/4 of an inch per foot.
- Ground thread taper pipe taps are standard in American Standard Pipe Form (NPT).
- Chamfer Style: Bottoming
- Flute Form: Straight Flute
- Shank Type: Square Shank
- Helix Angle: 0°
- Hole Style: Blind/Through Hole
- Pitch Form & Profile: 60°
- Pitch Tolerance: +.00025"/-.00000"
- Tolerance_Overall Length: ±.31"
- Tolerance_Shank: -.0015"
- Tolerance_Shank Square: -.004"
- Workpiece Material Range: Steel, Non-Ferrous, Cast Iron, Plastics
For more info, visit www.p65warnings.ca.gov.
| Item Number | Description | Price | Quantity | ||||
|---|---|---|---|---|---|---|---|
| 12-015-200 | YMW Vanadium H.S.S. NPT 4 Flute Taper Pipe Tap, 1/16"-27 Thread Size | 11/16" | .3125" | 2-1/8" | yes | $ 85.95 | |
| 12-015-201 | YMW Vanadium H.S.S. NPT 4 Flute Taper Pipe Tap, 1/8"-27 Thread Size | 3/4" | .4375" | 2-1/8" | yes | $ 85.95 | |
| 12-015-202 | YMW Vanadium H.S.S. NPT 4 Flute Taper Pipe Tap, 1/4"-18 Thread Size | 1-1/16" | .5625" | 2-7/16" | yes | $ 120.95 | |
| 12-015-203 | YMW Vanadium H.S.S. NPT 4 Flute Taper Pipe Tap, 3/8"-18 Thread Size | 1-1/16" | .7000" | 2-9/16" | yes | $ 203.95 | |
| 12-015-204 | YMW Vanadium H.S.S. NPT 4 Flute Taper Pipe Tap, 1/2"-14 Thread Size | 1-3/8" | .6875" | 3-1/8" | yes | $ 333.95 | |
| 12-015-205 | YMW Vanadium H.S.S. NPT 5 Flute Taper Pipe Tap, 3/4"-14 Thread Size | 1-3/8" | .9063" | 3-1/4" | yes | $ 543.95 | |
| 12-015-206 | YMW Vanadium H.S.S. NPT 5 Flute Taper Pipe Tap, 1"-11-1/2 Thread Size | 1-3/4" | 1.1250" | 3-3/4" | yes | $ 1,007.95 |