KYOCERA SGS 5/8" Diam 4 Flute Solid Carbide 0.045" Corner Radius End Mill Uncoated, 3-1/2" OAL, 1-1/4" LOC, 5/8" Shank Diam, 30° Helix, RH Cut, RH Flute, Centercutting 38079 - 01843408
Brand: KYOCERA SGS- SKU:
- 01843408
- ID:
- 618381
$178.53
KYOCERA SGS 5/8" Diam 4 Flute Solid Carbide 0.045" Corner Radius End Mill Uncoated, 3-1/2" OAL, 1-1/4" LOC, 5/8" Shank Diam, 30° Helix, RH Cut, RH Flute, Centercutting
Manufacturer Part #: 38079
S/N: 01843408
UNSPSC: 27112803
UPC: 691781380797
(Minimum Order Quantity=1, Package Quantity=1)
Specifications:
| Mill Diameter (Inch) | 5/8 |
| Mill Diameter (Decimal Inch) | 0.6250 |
| Number Of Flutes | 4 |
| Length of Cut (Inch) | 1-1/4 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | Bright/Uncoated |
| Overall Length (Inch) | 3-1/2 |
| Centercutting | No |
| Flute Direction | Right Hand |
| Corner Radius (Decimal Inch) | 0.0450 |
| Variable Index | Yes |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Coolant Through | No |
| Pitch | Normal |
| Overall Length (Decimal Inch) | 3.5 |
| Chipbreaker | No |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 1.2500 |
| Length Type | Short |
| Flute Type | Spiral |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Material Removal Type | Roughing & Finishing |
| Shank Diameter (Decimal Inch) | 0.6250 |
| Shank Diameter (Inch) | 5/8 |
| Corner Radius Tolerance | +0.00000 to -0.00200 in |
| Mill Diameter Tolerance | -0.0020/-0.0010 in |
| Shank Diameter Tolerance | h6 |
| Primary Workpiece Material | Steel, Stainless Steel, Cast Iron, Non-Ferrous Metal, Superalloys & Titanium |
| Primary Workpiece Material Code | P, M, K, N, S |
| UNSPSC Code | 27112803 |
| Secondary Workpiece Material | Hard Material |
| Secondary Workpiece Material Code | H |
| Material Grade | Micrograin |
| Series | 01C |
| Material Application | Steel, Stainless Steel, Cast Iron, Non-Ferrous Metal, Superalloys & Titanium, Hard Material |
| Coating Classification | Uncoated |
| Proprietary Coating Designation | Uncoated |
| For Use With. | End Mill Toolholders |
| Helix Style | Medium |
For more info, visit www.p65warnings.ca.gov.
