Clausing ATLAS CNC Vertical Mill w/ACU-RITE Mill Power Control - 3VSCNC
Brand: Clausing- SKU:
- 3VSCNC
- ID:
- 173889
$0.00
Clausing ATLAS CNC Vertical Mill w/ACU-RITE Mill Power Control
Overview
- Manual Operation with DRO
- Semi-Automatic Operation
- X and Y Axis CNC Operation
Features:
- Meehanite Castings for superior rigidity
- Infinitely Variable Spindle Speeds (60-4300 rpm)
- Hardened & Ground Ways
- Column & Knee Way Covers
- Ground T-slots to provide reference edge for positioning workpiece
- Hardened & Ground Table Surface
- Hardened & Ground Spindle
- Chromed & Ground Quill
- Ground Ball Screws & Chromed Motor Shaft
- ABEC 7/CP4 Spindle Bearings
- Coolant System w/Pump & Switch
- Chromed Cross Feed Screw Covers and One-piece Wiper
- Flexible Segmented Coolant Nozzle
- Articulating Head for Compound Angles
- Worm gear angular positioning of head in two directions
- Handwheel fine quill feed
- Lever-operated manual rapid quill movement
- Adjustable automatic feed disengagement for quill feed in both directions
- Reversing switch for clockwise or counter clockwise operation
- Spindle Brake (Hand operated)
- One-shot lubrication
- Mini Electrical Box for Coolant and Mains
- Tool Kit, Test and Accuracy Chart
- Operations Manual/Parts List
Optional Accessories:
- Chip Tray
- Full Electrics*
- Slotting Attachment
- Air PWR Drawbar #8 & #30*
- Air PWR Drawbar #40*
- Electric Drawbar*
- 52 Piece Clamping Kit
- Milling Chuck kit W/7 Collets
- Horizontal Milling Attachment
- AC Rapid Vertical Drive (4VSQ)*
- 4" Riser Block (2VS)
- 6" Riser Block (2VS)
- 8" Riser Block (All Models)
* Factory Installed only
Specifications:
| Models | 3VSCNC |
| Table & Ways | |
| Table Size | 10" x 54" |
| No. of T-Slots | 3 |
| T-Slot Width | .63" (16mm) |
| T-Slot Center Distance | 2.48" (63mm) |
| Table Ways | Dovetail |
| Knee Ways | Square |
| Column Ways | Dovetail |
| Travels | |
| X Longitudinal | 33" (838mm) |
| Y Cross | 15.5" (394mm) |
| Knee | 17.7" (450mm) |
| Ram | 20.5" (520mm) |
| Motors & Spindle | |
| Motor HP Variable | 3 (2.2Kw) |
| Variable Spindle Speed RPM | |
| Low Range | 60-500 |
| High Range | 550-4300 |
| Main Spindle Taper | R-8 or ISO-30 |
| Spindle Travel | 5" (127mm) |
| Quill Feed/Spindle Rev. | 0015/.003/.006in/rev. (.004/.008/.015mm/rev |
| Quill Diameter | 3.38" (127mm) |
| Construction | |
| Column Turret Diameter | 16.33" (415mm) |
| Knee Width | 14.17" (360mm) |
| Column Bearing Length | 18.11" (460mm) |
| Saddle/Table Bearing Length | 20.47" (520mm) |
| Ram/Turret Bearing Length | 17.51" (445mm) |
| Ram Length | 32.75" (832mm) |
| Table Load | 880 lbs. (400kg) |
| Net Weight | 2970 lbs. (1348kg) |
For more info, visit www.p65warnings.ca.gov.
