Seco Tools CNGA432S-L1-B CBN200 PCBN Turning Insert Uncoated, 1/2" Inscribed Circle, 1/32" Corner Radius, 80° Diamond 02422749 - 43144757
Brand: Seco Tools- SKU:
- 43144757
- ID:
- 676380
$121.80
Seco Tools CNGA432S-L1-B CBN200 PCBN Turning Insert Uncoated, 1/2" Inscribed Circle, 1/32" Corner Radius, 80° Diamond
Manufacturer Part #: 02422749
S/N: 43144757
UNSPSC: 23242105
(Minimum Order Quantity=1, Package Quantity=1)
Specifications:
| ANSI Insert Code | CNGA432 |
| ISO Insert Code | CNGA120408 |
| Relief Angle | 0 |
| Insert Style | CNGA |
| Corner Radius (Inch) | 1/32 |
| Corner Radius (Decimal Inch) | 0.0315 |
| Included Angle | 80 |
| Manufacturer Grade | CBN200 |
| Coating/Finish | Bright/Uncoated |
| Wiper Edge | No |
| Insert Hand | Neutral |
| Insert Thickness (Inch) | 3/16 |
| Insert Thickness (Decimal Inch) | 0.1874 |
| Series | CNGA-Flat Top |
| Inscribed Circle (Inch) | 1/2 |
| Inscribed Circle (Decimal Inch) | 0.5000 |
| Inscribed Circle (mm) | 12.70 |
| Insert Material | PCBN |
| Insert Shape | C - Diamond (Rhombic) 80-Deg |
| Chip Breaker Operation | Flat Top |
| Grade Characteristics | Cast Iron (K) - High Wear-Resistance to Moderate Wear-Resistance and Toughness, Special, Super Alloys (S) - High Wear-Resistance to Moderate Wear-Resistance and Toughness |
| Number Of Cutting Edges | 2 |
| Side Clearance | Negative |
| Insert Shape Code | C |
| Hole Diameter (Decimal Inch) | 0.2028 |
| Maximum Depth of Cut (Decimal Inch) | 0.0400 |
| Insert Holding Method | Clamp, Pin, Lever Lock |
| Width (Inch) | 1/2 |
| Clearance Code | N |
| Tolerance Code | G |
| Coating Process | PCBN |
| Length Range (Decimal Inch) | 0.5000 - 0.6000 |
| Rake | Negative |
| Insert Length (Decimal Inch) | 0.5079 |
| Primary Workpiece Material | Cast Iron |
| Primary Workpiece Material Code | K, S |
| Secondary Workpiece Material | Superalloys & Titanium, Hard Material |
| Secondary Workpiece Material Code | S, H |
| Iso Code | CNGA120408S-02020-L1-B |
| Standards | ANSI, ISO |
| Manufacturers Catalog Number | 02422749 |
| Material Grade | K10, K20 |
| Single or Multi Tipped | Multi Tipped |
| Proprietary Coating Designation | Uncoated |
| Lead Angle | 80 |
| Coating Classification | Uncoated |
| Chip Breaker | Flat Top |
| Rake Angle | 0 |
| Cutting Edge Style | Chamfered, Honed |
| Industry Standard Number | CNGA432S-00820-L1-B |
| Width (Decimal Inch - 4 Decimals) | 0.5000 |
| Multi-Use Tool | Yes |
| Full Radius | No |
| Multi-Use Application | Boring, Facing, Turning |
| Tip Length (Decimal Inch) | 0.0940 |
| ANSI Size Code | 432 |
| ISO Size Code | 120408 |
| UNSPSC Code | 23242105 |
| Insert Size Code | 432 |
For more info, visit www.p65warnings.ca.gov.
