Mitutoyo Linear Gage LGF-Z with Origin Point Mark Series 542 - 542-166

Brand:   Mitutoyo
SKU:
542-166
ID:
111150
Range 2" / 50mm
Resolution 0.001mm
callling
$1,230.00
Current Stock:
Adding to cart… The item has been added

Mitutoyo

Mitutoyo Linear Gage LGF-Z with Origin Point Mark Series 542 - 542-166

Range: 2" / 50mm
Resolution: 0.001mm


Optional Accessories:

  • Air drive unit:
        For 10mm range models: No.02ADE230
        For 25mm range models: No.02ADE250
        For 50mm range models: No.02ADE270
          * Required air pressure: 0.2 to 0.4MPa
          * Spindle extends when air is supplied.
  • Rubber boot (spare):
        For 10mm range models: No.238772
        For 25mm range models: No.962504
        For 50mm range models: No.962505
  • Thrust stem set:
        For 10mm range models: No.02ADB680
        Thrust stem: No.02ADB681
        Clamp nut: No.02ADB682
        For 25/50mm range models: No.02ADN370
        Thrust stem: No.02ADN371
        Clamp nut: No.02ADB692
          * External dimensions are described in the dimensional drawing of the product.
          * Thrust stem set is a combination of thrust stem and a clamp nut. A special spanner is required for tightening.
             If using multiple gages, a thrust stem set for each gage and one special spanner are required.
  • Spanner Wrench:
        For 10mm range models: No.02ADB683
        For 25/50mm range models: No.02ADB693


Extension Cables:

  • Extension cable (5m): 02ADF260
  • Extension cable (10m): 02ADF280
  • Extension cable (20m): 02ADF300


Applicable Counters:


Specifications:

Order No 542-166
Measuring Range 2" / 50mm
Resolution 0.001mm
Measuring accuracy (20°C) (1.5+L/50)
Quantizing error ±1 count
Measuring Force-Contact Point upwards - 4.9N or less
horizontal - 5.3N or less
downwards - 5.7N or less
Position detection method Photoelectric linear encoder
Response speed*1 1500mm/s
Output signal 90° phase difference, differential square wave (RS-422A equivalent), minimum edge intervals: 250ns for 0.5µm model, 500ns for 1µm model
Mass Approx. 400g
Dust/water resistance*2 Equivalent to IP66 (only gage head)
Contact point ø3mm carbide-tipped (fixing screw: M2.5 (P=0.45)×5), standard contact point No.901312
Stem Dia ø15mm
Bearing type Linear ball bearing
Output cable length 2m (directly extended from the main unit)
Connector Plug: PRC05-P8M (TAJIMI), Compatible receptacle: PRC05-R8F (TAJIMI)
Operating temperature (humidity) range 0 to 40°C (RH 20 to 80%, no condensation)
Storage temperature (humidity) range –10 to 60°C (RH 20 to 80%, no condensation)
Remarks w/ orgin point mark



See all Mitutoyo Linear Gages LGF-Z with Origin Point Mark Series 542


Warning Icon

WARNING: This Product Can Expose You To Materials And/Or Chemicals Which Are Known To The State Of California To Cause Cancer And/Or Reproductive Harm.

Mitutoyo Linear Gage LGF-Z with Origin Point Mark Series 542 - 542-166

Mitutoyo Linear Gage LGF-Z with Origin Point Mark Series 542 - 542-166

Mitutoyo Linear Gage LGF-Z with Origin Point Mark Series 542…

$1,230.00