Bond Model 5500 Extreme Weight Dolly - 5500-EZBrand: Bond
Bond Model 5500 Extreme Weight Dolly - 5500-EZ
Designed to move very heavy articles in places where traditional equipment is not feasible; the EXTREME WEIGHT DOLLY is a solution!
Normally a crane will lift the article and place it on a set of dollies for transport. The casters were chosen for the durability of the caster during rocking motion and uneven loads. The large diameter of the wheels supports easy start to rolling and allows the dolly to move over rougher surfaces; however, it is always best to use caution when moving very heavy articles over uneven floors or crevices.
BODY: 3/8" Thick steel plate with 6” diameter straight sided well with a powder coat finish. Well clearance is 2” from the floor as our standard but can we change per your specifications.
CASTERS: Super duty kingpin-less casters are chosen for the durability of the kingpin-less design. The weakest link in a standard caster is kingpin failure causing the caster to break at the raceway; this is avoided in the kingpin-less caster design.
WHEELS: 6" diameter wheels made of durable 3/4" thick polyurethane thread with a heavy duty cast iron center and tapered roller bearings. The tread is 65 Shore D hardness polyurethane chemically bonded to the wheel center to assure durability in heavy duty service. The polyurethane is non-marking, non-staining and floor protective. It resists oil, grease, water and most solvents.
WEIGHT CAPACITY: 3500 lbs per dolly
TEMPERATURE RANGE: -45 o to 180 o F.
WEIGHT: 90 lbs. each
Same base and caster as above with 6” diameter wheels made of quiet riding and durable polyurethane thread with a cast iron center and tapered bearings. The slightly crowned tread is 95 Shore A hardness polyurethane. The polyurethane is non-marking, non-staining and floor protective.
Feature: Excellent floor protection at a lower cost
Weight Capacity: 3500 lbs.
Weight each: 85 lbs.
See all versions of the Bond Model 5500 Extreme Weight Dolly