Sandvik Coromant 3mm Diam 6 Flute Solid Carbide Corner Chamfer End Mill TiAlN Finish, 83mm OAL, 4.5mm LOC, 12mm Shank Diam, 0° Helix 6259475 - 61349783
Brand: Sandvik Coromant- SKU:
- 61349783
- ID:
- 618013
$299.81
Sandvik Coromant 3mm Diam 6 Flute Solid Carbide Corner Chamfer End Mill TiAlN Finish, 83mm OAL, 4.5mm LOC, 12mm Shank Diam, 0° Helix
Manufacturer Part #: 6259475
S/N: 61349783
UNSPSC: 27112803
(Minimum Order Quantity=1, Package Quantity=1)
Specifications:
| Mill Diameter (Decimal Inch) | 0.1181 |
| Mill Diameter (mm) | 3.00 |
| Number Of Flutes | 6 |
| Length of Cut (mm) | 4.50 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | TiAlN |
| Centercutting | No |
| Flute Direction | Right Hand |
| Chamfer Width (Decimal Inch) | 0.1772 |
| Variable Index | No |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Overall Length (mm) | 83.00 |
| Coolant Through | No |
| Pitch | Close |
| Overall Length (Decimal Inch) | 3.2087 |
| Chipbreaker | Yes |
| Chamfer Angle | 45 |
| Length Of Cut (Decimal Inch - 4 Decimals) | 0.1772 |
| Length Type | Regular |
| Flute Type | Straight |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Material Removal Type | Roughing & Finishing |
| Shank Diameter (Decimal Inch) | 0.4724 |
| Shank Diameter (mm) | 12.00 |
| Reach Length (Decimal Inch) | 0.1772 |
| Shank Diameter Tolerance | h6 |
| Primary Workpiece Material | Steel, Stainless Steel, Cast Iron, Superalloys & Titanium, Hard Material |
| Primary Workpiece Material Code | P, M, K, S, H |
| UNSPSC Code | 27112803 |
| Material Grade | 1620 |
| Series | 1C050 |
| Additional Information | Chamfering |
| Coating Classification | PVD |
| Chamfer Length (Decimal Inch) | 0.1772 |
| Helix Style | Low |
| Manufacturers Catalog Number | 1C050-0300-045-XA |
For more info, visit www.p65warnings.ca.gov.
