Phase II 4" Table Diam, Horizontal & Vertical Rotary Machining Table 2.76" Centerline Height, 2.76" Bore Diam, 2MT Center Taper, 0.236" T-Slot Width 221-304 - 86873510
Brand: Phase II- SKU:
- 86873510
- ID:
- 452836
$842.98
Phase II 4" Table Diam, Horizontal & Vertical Rotary Machining Table 2.76" Centerline Height, 2.76" Bore Diam, 2MT Center Taper, 0.236" T-Slot Width
Manufacturer Part #: 221-304
S/N: 86873510
UNSPSC: 31380000
(Minimum Order Quantity=1, Package Quantity=1)
Specifications:
| Setting Position | Horizontal, Vertical |
| Tilting | No |
| Table Diameter | 4in |
| T-slot Width | 0.236in |
| T-Slot Width (Decimal Inch) | 0.2360 |
| Centerline Height | 2.76in |
| Center Bore Diameter | 2.76in |
| Center Hole Concentricity | 8.0E-4in |
| Cross-slide | No |
| Indexing Accuracy | 45s |
| Flatness Of Surface | 6.0E-4in |
| Parallelism - Clamp Surface To Base | 8.0E-4in |
| Squareness - Clamp To Angle Face | 4.0E-4 in |
| Squareness - Clamp To Center Slot | 8.0E-4 in |
| Base Width | 1.89in |
| Overall Height | 13.43in, 4.92in |
| Centerline Height (mm) | 2.76in |
| Centerline Height (Inch) | 2.76in |
| Center Taper | 2MT |
| Squareness - Clamp to Center Slot (Decimal Inch) | 0.0008 |
| Squareness - Clamp to Angle Face (Decimal Inch) | 0.0004 |
| Flatness of Surface (Decimal Inch) | 0.0006 |
| UNSPSC Code | 23242120 |
| Parallelism - Clamp Surface to Base (Decimal Inch) | 0.0008 |
| Base Width (mm) | 1.89in |
| Base Width (Decimal Inch) | 1.8900, 1.89in |
| Base Length (mm) | 4.9200 |
| Overall Height (mm) | 13.43in, 4.92in |
| Overall Height (Inch) | 13.43in, 4.92in |
For more info, visit www.p65warnings.ca.gov.
