ABSOLUTE Digimatic Indicator ID-C Series 543- GO/NG Signal Output Function - 543-282

Brand:   Mitutoyo
SKU:
543-282
ID:
89178
Back Lug
Call for Pricing
Current Stock:

Call for Pricing

Mitutoyo

Mitutoyo ABSOLUTE Digimatic Indicator ID-C Series 543

with Green/Red LED GO/NG Signal Output Function

SKU: 543-282

Features:

  • With the max./min. value holding function, the signal ID-C can output the signal of the GO/±NG judgment result against the peak values set. Substitute for the mechanical/electrical contact, the judgment is carried out by calculating the measurement data obtained. This provides high reliability with no deterioration of the contact point and volume adjustment.
  • The signal can be output to an external device like a sequencer through the NPN open-collector.
  • The GO/±NG judgment result is also indicated by the green/red LED and the "<, O, >" signs on LCD.
  • Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle "Absolute Position" from the origin at power-on.
  • The Signal ID-C achieves the IP54 protection level to resist dust and contaminants for safe operation in harsh machine shop environments.

Technical Data:

  • Accuracy: Refer to the list of specifications.
  • Resolution: 0.001mm, .00005”/0.001mm or .0001”/0.001mm
  • Display: LCD
  • Length standard: ABSOLUTE electrostatic capacitance type linear encoder
  • Max. response speed: Unlimited
  • Measuring force: 2.0N or less
  • Power supply: DC 12 - 24V±10%
  • Dust/Water protection level: IP54

Function:

  • Data output (–NG/OK/NG signal, NPN open collector), Remote control (hold-preset, preset-recall, zero-set), Origin- set/Preset, Zeroset, GO/±NG judgment, Max/Min/Runout value holding, Counting direction switching, Power ON/OFF, inch/mm conversion (on inch/metric models only)
  • Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error

Specifications:

Order No 543-282
(w/lug-back)
Model ID-C112JE
Resolution .00005in
0.001mm
Range .5in 12.7mm
Accuracy .00012in
Measuring Force 2.0N or less
Type ANSI/AGD type
Stem dia 3/8in
4-48 UNF Thread
ABSOLUTE Digimatic Indicator ID-C Series 543- GO/NG Signal Output Function - 543-282

ABSOLUTE Digimatic Indicator ID-C Series 543- GO/NG Signal Output Function - 543…

ABSOLUTE Digimatic Indicator ID-C Series 543- GO/NG Signal O…