Clausing / Erlo X35 Series Geared-Drive Round-Column Drill, 23.6" GH, Electronic Clutch Feed, 4MT, 2 HP, Floor, with Tapping Feature - BX35RS
Brand: Clausing- SKU:
- BX35RS
- ID:
- 991024
Clausing / Erlo X35 Series Geared-Drive Round-Column Drill, 23.6" GH, Electronic Clutch Feed, 4MT, 2 HP, Floor, with Tapping Feature - BX35RS
Standard Features & Equipment:
- Drilling capacity in steel: 1.26" maximum
- Drilling capacity in cast iron: 1.38" maximum
- Tapping capacity in steel: 0.87" maximum
- Tapping capacity in cast iron: 1.18" maximum
- Hardened and ground high quality steel gears
- Speed plate and selecting levers on front of head
- Gear box lubrication by automatic pump
- Machine base with 2 T-slots, coolant tank and pump
- Large worktable with 3 T-slots
- Feed crank wheel for manual feed
- Depth scale and adjustable depth stop
- Work light
- Built-in low voltage electrical equipment in machine head
- Emergency STOP
- Drill guard with micro switch
- SX Features manual quill feed system
- AX Features mechanical clutch quill feed system
- BX Features electro-magnetic clutch quill feed system
Standard Motor: 1800 rpm
- Spindle Speeds (rpm): 158-232-332-382-559-799-1059-1555-2222
Optional EVS Standard Motor: 1500 rpm
- Spindle Speeds (rpm) Electronic VS (9): (A) 66-211, (B) 97-310, (C) 138-443, (D) 160-510, E) 233-746, (F) 333-1066, (G) 440-1413, (H) 648-2074, (I) 926-2963
Specifications:
| Capacities | Maximum drilling capacity in steel | 1.26" |
| Maximum drilling capacity in cast iron | 1.38" | |
| Maximum tapping capacity in steel | .875" | |
| Maximum tapping capacity in cast iron | 1.125" | |
| Specifications | Spindle taper | 4MT |
| Quill diameter | 2.56" | |
| Spindle travel (drilling depth) | 5.91" | |
| Main motor power | 2 hp | |
| Coolant pump motor power (optional) | .1 hp | |
| Number of speeds | 9 | |
| Number of automatic feeds (AX & BX) | 3 | |
| Auto feed range: in/rev (AX &BX) | .0039 / .0078 / .0118 | |
| Dimensions and Weights | Height (A) | 87.4" |
| Base: length x width (B) | 26.8" x 16.5" | |
| Base to spindle (C) | 50.39" | |
| Spindle center to column (D) | 11.81" | |
| Spindle to Table (E) | Minimum: 5.71" Maximum: 31.89" |
|
| Worktable: length x width (F) | 15.75" x 16.54" | |
| Base height (G) | 4.72" | |
| Column diameter (H) | 4.92" | |
| Net weight SX | 847 lbs. | |
| Net weight AX | 880 lbs. | |
| Net weight BX | 902 lbs. | |
| Shipping weight SX | 957 lbs. | |
| Shipping weight AX | 990 lbs. | |
| Shipping weight BX | 1,012 lbs. | |
| Shipping dim SX (length x width x height) | 91" x 24" x 44" | |
| Shipping dim AX (length x width x height) | 91" x 24" x 44" | |
| Shipping dim BX (length x width x height) | 93" x 24" x 46" |
Optional Equipment:
(Contact Us about Pricing & Availability):
Factory Installed
MGI-X - Rotating & Tilting Table (standard on X40 models)
MGM-X - Reversing Rotating Table (X35 models)
RHP-X - Auto Thread System by Master SPDL (incl one tap pitch)
HGP-X - Master Guide Spindle & Nut (extra set ea. mm)
HGPS-X - Master Guide Spindle & Nut Specl Thrds (extra set ea. inch)
ACNL-X - Pneumatic Counter Balance w/Rapid Approach And Retract (BX models only)
CI-X - Integral Tube Drill Cycle Profile & Intermittent (BX only)
SC-X - 7.8" Column Riser
LBC-X - Digital Readout Scale
VE-X - Variable Speed Inverter w/ Digital RPM Counter
Speeds: A) 66-211, B) 97-310, C) 138-443, D) 160-510, E) 233-746, F) 333-1066, G) 440-1413, H) 648-2074, I) 926-2963
MB-X - Security Bimanual Command (BX models only)
MASG-X - Motorized Table w/Rotating Support (req for MB4&5 Tbl)
X99150 - Motor, 1200 RPM Motor
X99160 - Motor, 3600 RPM Motor
X99170 - Motor, 900 / 1800 RPM Motor
X99180 - Motor, 1800 / 3600 RPM Motor
Cross Slide Table
MB-2 - Cross Table 11" x 7"
MB-3 - Cross Table 15.7" x 7" (requires MASG-X)
MB-4 - Cross Table 19.6" x 9.8" (requires MASG-X)
All Accessories
PST - Cycle Start Foot Pedal
PSR - Foot Pedal For Reversing (Must have the RS version)
See all Clausing / Erlo X35 Series Geared-Drive Round-Column Drills
For more info, visit www.p65warnings.ca.gov.
