Clausing / Erlo X35 Series Geared-Drive Round-Column Drills

Brand:   Clausing
ID:
991020
callling
Current Stock:

Clausing

Clausing / Erlo X35 Series Geared-Drive Round-Column Drills


Standard Features & Equipment:

  • Drilling capacity in steel: 1.26" maximum
  • Drilling capacity in cast iron: 1.38" maximum
  • Tapping capacity in steel: 0.87" maximum
  • Tapping capacity in cast iron: 1.18" maximum
  • Hardened and ground high quality steel gears
  • Speed plate and selecting levers on front of head
  • Gear box lubrication by automatic pump
  • Machine base with 2 T-slots, coolant tank and pump
  • Large worktable with 3 T-slots
  • Feed crank wheel for manual feed
  • Depth scale and adjustable depth stop
  • Work light
  • Built-in low voltage electrical equipment in machine head
  • Emergency STOP
  • Drill guard with micro switch
  • SX Features manual quill feed system
  • AX Features mechanical clutch quill feed system
  • BX Features electro-magnetic clutch quill feed system


Standard Motor: 1800 rpm

  • Spindle Speeds (rpm): 158-232-332-382-559-799-1059-1555-2222

Optional EVS Standard Motor: 1500 rpm

  • Spindle Speeds (rpm) Electronic VS (9): (A) 66-211, (B) 97-310, (C) 138-443, (D) 160-510, E) 233-746, (F) 333-1066, (G) 440-1413, (H) 648-2074, (I) 926-2963


Specifications:

Capacities Maximum drilling capacity in steel 1.26"
Maximum drilling capacity in cast iron 1.38"
Maximum tapping capacity in steel .875"
Maximum tapping capacity in cast iron 1.125"
Specifications Spindle taper 4MT
Quill diameter 2.56"
Spindle travel (drilling depth) 5.91"
Main motor power 2 hp
Coolant pump motor power (optional) .1 hp
Number of speeds 9
Number of automatic feeds (AX & BX) 3
Auto feed range: in/rev (AX &BX) .0039 / .0078 / .0118
Dimensions and Weights Height (A) 87.4"
Base: length x width (B) 26.8" x 16.5"
Base to spindle (C) 50.39"
Spindle center to column (D) 11.81"
Spindle to Table (E) Minimum: 5.71"
Maximum: 31.89"
Worktable: length x width (F) 15.75" x 16.54"
Base height (G) 4.72"
Column diameter (H) 4.92"
Net weight SX 847 lbs.
Net weight AX 880 lbs.
Net weight BX 902 lbs.
Shipping weight SX 957 lbs.
Shipping weight AX 990 lbs.
Shipping weight BX 1,012 lbs.
Shipping dim SX (length x width x height) 91" x 24" x 44"
Shipping dim AX (length x width x height) 91" x 24" x 44"
Shipping dim BX (length x width x height) 93" x 24" x 46"



Optional Equipment:
(Contact Us about Pricing & Availability):

Factory Installed

MGI-X - Rotating & Tilting Table (standard on X40 models)
MGM-X - Reversing Rotating Table (X35 models)
RHP-X - Auto Thread System by Master SPDL (incl one tap pitch)
HGP-X - Master Guide Spindle & Nut (extra set ea. mm)
HGPS-X - Master Guide Spindle & Nut Specl Thrds (extra set ea. inch)
ACNL-X - Pneumatic Counter Balance w/Rapid Approach And Retract (BX models only)
CI-X - Integral Tube Drill Cycle Profile & Intermittent (BX only)
SC-X - 7.8" Column Riser
LBC-X - Digital Readout Scale
VE-X - Variable Speed Inverter w/ Digital RPM Counter
Speeds: A) 66-211, B) 97-310, C) 138-443, D) 160-510, E) 233-746, F) 333-1066, G) 440-1413, H) 648-2074, I) 926-2963
MB-X - Security Bimanual Command (BX models only)
MASG-X - Motorized Table w/Rotating Support (req for MB4&5 Tbl)
X99150 - Motor, 1200 RPM Motor
X99160 - Motor, 3600 RPM Motor
X99170 - Motor, 900 / 1800 RPM Motor
X99180 - Motor, 1800 / 3600 RPM Motor

Cross Slide Table

MB-2 - Cross Table 11" x 7"
MB-3 - Cross Table 15.7" x 7" (requires MASG-X)
MB-4 - Cross Table 19.6" x 9.8" (requires MASG-X)

All Accessories

PST - Cycle Start Foot Pedal
PSR - Foot Pedal For Reversing (Must have the RS version)


Warning Icon

WARNING: This Product Can Expose You To Materials And/Or Chemicals Which Are Known To The State Of California To Cause Cancer And/Or Reproductive Harm.

Clausing / Erlo X35 Series Geared-Drive Round-Column Drills

Clausing / Erlo X35 Series Geared-Drive Round-Column Drills

Clausing / Erlo X35 Series Geared-Drive Round-Column Drills