Dorian Tool Multi-Clamp Toolholders MCLN Style
- For turning, facing or Contouring
- Negative rake.
- Negative 5º side cutting edge angle.
- Accepts these 80º diamond inserts: CNMA, CNMG, CNMM, CNMP
- Approach Angle: 95°
- Insert Not Included.
| Item No. | Overall Length | Insert I.C. | Shank Height/Width | Use Insert | Clamp | Clamp Screw | Lock Pin |
| 55-710-005 | 4-1/2" | 1/2" | 0.750" | CNMG43_ | CL-20 | XNS-48 | NL-46 |
| 55-710-010 | 6" | 1/2" | 1" | CNMG43_ | CL-20 | XNS-48 | NL-46 |
| 55-710-020 | 6" | 3/4" | 1" | CNMG64_ | CL-12 | XNS-510 | NL-68 |
| 55-710-025 | 6" | 3/4" | 1.250" | CNMG64_ | CL-12 | XNS-510 | NL-68 |
| 55-710-030 | 7" | 3/4" | 1.500" | CNMG64_ | CL-12 | XNS-510 | NL-68 |
| 55-715-505 | 4-1/2" | 1/2" | 0.750" | CNMG43_ | CL-20 | XNS-48 | NL-46 |
| 55-715-510 | 6" | 1/2" | 1" | CNMG43_ | CL-20 | XNS-48 | NL-46 |
| 55-715-520 | 6" | 3/4" | 1" | CNMG64_ | CL-12 | XNS-510 | NL-68 |
| 55-715-525 | 6" | 3/4" | 1.250" | CNMG64_ | CL-12 | XNS-510 | NL-68 |
| 55-715-530 | 7" | 3/4" | 1.500" | CNMG64_ | CL-12 | XNS-510 | NL-68 |
For more info, visit www.p65warnings.ca.gov.
