duMONT Minute Man Production Keyway Broaches
- Designed to cut keyway in one pass for maximum production
- Push-Type Keyway.
- Broaches are self supporting, no shims or bushing required.
- High speed operation.
- Accurate long run production.
- Designed for large production runs of identical keyways with identical bores
- Use in either hydraulic or hand operated presses.
- Pressure Required for Max. L/C Based on Mild Steel: 390
- High Speed Steel
- Bright Finish
- Hardness: 58 to 60 RC
- Made in the U.S.A.
Item No. | Keyway Width | Dimension A | Broach Length | Length of Cut | |
30-600-200 | 1/16" | .224" | 5-5/8" | 13/64" Min. | 1" Max. |
30-600-201 | 1/16" | .287" | 6-3/16" | 13/64" Min. | 1" Max. |
30-600-202 | 1/8" | .437" | 8-1/2" | 17/64" Min. | 1-1/4" Max. |
30-600-203 | 1/8" | .565" | 11-3/4" | 25/64" Min. | 2-1/2" Max. |
30-600-204 | 1/8" | .630" | 11-3/4" | 25/64" Min. | 2-1/2" Max. |
30-600-205 | 1/8" | .693" | 11-3/4" | 25/64" Min. | 2-1/2" Max. |
30-600-206 | 3/16" | .716" | 14-/34" | 25/64" Min. | 2-1/2" Max. |
30-600-207 | 3/16" | .844" | 14-/34" | 25/64" Min. | 2-1/2" Max. |
30-600-208 | 3/16" | .970" | 14-/34" | 25/64" Min. | 2-1/2" Max. |
For more details and Specifications on each item, copy the Item Number below into the search bar at the top of the page.
For more info, visit www.p65warnings.ca.gov.