GMC Electrical Power Shears
Model # EPS-1016E - 10 ft. x 16 Ga, 7-1/2 HP, 220V/440V, 3 ph
Model # EPS-1014E - 10 ft. x 14 Ga, 10 HP, 220V/440V, 3 ph (Replaces GMC HS-1014MD)
Model # EPS-1014M - 10 ft. x 14 Ga, 10 HP, 220V/440V, 3 ph, with 26" Manual Back Gauge (Replaces GMC HS-1014MD)
Standard Features:
- ISO 9001 certified
- American design and Taiwan quality machine
- With material front out tray
- HD all steel construction for maximum rigidity
- Precision driven gearbox
- Full length 26 strokes per minute
- 60" long squaring arm with inch / mm scale
- spring hold-downs
- high grade carbon/chrome alloy steel blades and hardened to 62 hrc, 2-edge indexable upper blade and 4-edge indexable bottom blade
- Full length with full view finger guard
- Front supports and (2) side gauges
- Safety type foot pedal control
- Jog, single continuous auto operation modes
- One year warranty for parts
Standard Equipment:
- 36" front operated power back gauge with German SIKO digital readout & fine adjustment wheel
- 60" long squaring arm with inch / mm scale, mounted on right side of the table
- With material front out tray
- Rear lifting support for thin sheet metal
- 2 each 24” front support arms
- full length finger guard
- Removable safety foot pedal control
- One set of upper & lower blades
Optional Equipment:
- Safety fence for enclosure of the back side of the machine: $1,150.00
Specifications:
| Model | EPS-1016E | EPS-1014E |
| Cutting capacity - Mild Steel | 10' x 16 Ga. | 10' x 14 Ga. |
| Cutting capacity - Stainless Steel | 10' x 20 Ga. | 10' x 18 Ga. |
| Blade Length | 10' 1" | 10' 1" |
| Strokes per Minute | 26 | 26 |
| Worktable Height | 30-1/2" | 30-1/2" |
| Front Support Arm | 24" | 24" |
| Back Gauge | 36" Power Back gauge | 36" Power Back gauge |
| Material Front Out Tray | 10' x 4' 6" | 10' x 4' 6" |
| Blade Rake Angle | 1.5 degree | 2.0 degree |
| Main Motor | 7-1/2 HP, 220V / 440V, 3 phase | 10 HP, 220V/440V, 3 phase |
| Motor for Power Back Gauge | 1-1/2 HP, 220V/440V, 3 phase | 1-1/2 HP, 220V/440V, 3 phase |
| Machine Weight | 6,230 LBS | 7,350 LBS |
| Machine Dimensions | 147" x 57" x 53" | 147" x 57" x 53" |
| Model | EPS-1014M |
| Cutting capacity - Mild Steel | 10' x 14 Ga |
| Cutting capacity - Stainless Steel | 10' x 18 Ga |
| Blade Length | 10' 1" |
| Strokes per Minute | 26 |
| Worktable Height | 30-1/2" |
| Front Support Arm | 24" |
| Back Gauge | 26" Manual Back gauge |
| Blade Rake Angle | 2.0 degree |
| Main Motor | 10 HP, 220V / 440V, 3 phase |
| Machine Weight | 7280 LBS |
| Machine Dimensions | 147" x 57" x 53” |
For more info, visit www.p65warnings.ca.gov.
