IPA NATO MUTT® Military Mobile Universal Trailer Tester - M2000

IPA NATO MUTT® Military Mobile Universal Trailer Tester - M2000

Military Universal Trailer Tester

State-of-the-Art, 12/24V, ABS, Remote-Controlled, Diagnostic Trailer Tester

Industry-leading trailer tester that quickly repairs and troubleshoots military and commercial trailer light and air brake systems. The durable NATO MUTT® is designed for on or off-site inspections.

ELECTRICAL TESTING (12/24 Volt Operation)

• Designed for both 7 round pin, SAE J560, and 12 pin STANAG 4007 NATO plugs
• Power lights: Manually, All-On, Auto Scan, or by Remote Control
• Audible and visual alerts: cross, open, overloaded and short circuit indication
• Pulsar® mode allows diagnostic repair
• Advanced trailer wiring diagnostics
• Amperage readout and range (0-20 amps)
• Ground failure detection: differentiates between wire and chassis ground

ABS TESTING

• Access ABS blink codes
• Test ABS fault blink codes via Auxiliary and Brake Circuit activation (i.e. Meritor/Wabco, Bendix® TABS-6 and Haldex systems)

AIR BRAKE TESTING

• Performs leak down test on service and emergency lines
• Remote control allows observation of slackers to measure and adjust pushrods
• Real time, repetitive brake activation to find developing problems and verify leaking servo cans
• Features an internal air regulator

REMOTE CONTROL

• Remotely test all trailer electric circuitry and air brake actuation with new 12-button remote
• (2x) 3-button remote controls test all trailer electric circuitry and air brake actuation, 200+ ft. range
• Sync multiple (12) remotes to one unit

Includes:

• 12-Button Remote Control
• (2x) 3-Button Remote Controls
• 5' 7-Way Cable
• Chassis Ground Cable
• External Battery Connector
• 8' Glad Hand Hoses
• 10 Amp Battery Charger
• Face/Battery Shield
• Rain Cover

Specifications:

• Warranty: 3 Year Limited
• Connection Type: 7-Way Round Pin, SAE J560 and 12 Pin, MS 75021-2 NATO
• Power Input: 1 or 2 Group 31 (or Similar Battery) or External 12/24V Power Source
• Output: 12/24V DC @ 20A Max
• Operating Pressure: 120 PSI Max
• Controls: Manual, Remote, Automatic