Kent Manual Variable Speed Precision 13" x 40" Lathe - TRL-1340V
Brand: Kent USA- SKU:
- TRL-1340V
- ID:
- 317797
$0.00
Kent Manual Variable Speed Precision 13" x 40" Lathe - TRL-1340V
- Induction hardened & precision ground gears.
- Quick feed reversal knob allows instant feed reversal without stopping the main motor.
- Safety clutch disengages feed when overloaded.
- Jog button for effortless spindle speed changes.
- One-shot pump conveniently lubricates bed and cross slide ways.
- Safety full-length foot brake.
- AC-frequency drive with infinitely variable speed control and digital RPM display. (V-models)
- T-slots on cross slide for mounting optional attachments. (TRL and RML-series)
- Large 3.125" spindle through bore and a 2-speed tail stock.(ML-series)
- Heaviest duty 13” lathe in its class
- 5 HP main spindle motor
- 16 speeds, geared headstock (TRL-1340) (50 – 2570 RPM)
- Infinitely variable speed in Hi/Low geared speed ranges (TRL-1340V) (100-500-3000 RPM)
- Jog button for easy gear changes
- Hardened and ground gears and bedways
- Cast iron machine bedways and base
- Removable chip pan for easy clean up
- Foot brake and T-Slot compound
- Inch/metric reading on dials
- Inch/metric ruler on tailstock quill
- ISO 9001 certified manufacturer
Standard Accessories:
- 3-jaw chuck (7″)
- Steady rest
- Follow rest
- 4-position tool post
- Coolant system
- Full-length splash guard
- Worklight
- Chuck cover
- Thread chasing dial
- Toolbox with standard tools
| Model No. | TRL-1340V |
| Swing Over Bedways | 13.4" |
| Swing Over Cross Slide | 8.25" |
| Swing Over Gap | 20" |
| Gap Length w/Face Plate | 4.5" |
| Distance Between Centers | 40" |
| Spindle Through Hole | 1.57" |
| Spindle Nose Camlock | D 1-4 |
| Spindle to Sleeve Taper | MT#5 |
| Spindle Speeds | 50-2570 RPM |
| Spindle Speeds V-Models | Variable (2 Ranges) 100-500-3000 RPM |
| Bed Width | 9" |
| Cross Slide | 16.5" x 6"(w/2 T-slots) |
| Cross Slide travel | 7" |
| Compound Travel | 4" |
| Thread Capacity Inch | (45) 2 to 72 TPI |
| Thread Capacity Metric | (39) 0.2 to 14mm |
| Modular Capacity | (18) 0.3 to 3.5 |
| Diametrical Pitch Range | (21) 8 to 44 |
| Longitudinal Feeds | 0.002" to 0.067" |
| Cross Feeds | 0.001" to 0.0375" |
| Quill Diameter | 2" (50) |
| Quill Taper | MT#3 |
| Quill Travel | 4" (105) |
| Spindle Main Motor | 5 HP |
| Control Circuit Voltage | 24 V |
| Shipping Dimensions | 76" x 30" x 58" |
| Weight | 2440 lbs. |
For more info, visit www.p65warnings.ca.gov.
