LeBLOND Geared Head High Speed Manual Precision Lathe 16" x 60" - RKL-1560G
Brand: LeBLOND- SKU:
- RKL-1560G
- ID:
- 319880
LeBLOND Geared Head High Speed Manual Precision Lathe 16" x 60" - RKL-1560G
RKL1500G Series Lathe
Features:
HEAVY DUTY SPINDLE: The headstock spindle is machined from forged alloy steel. It is hardened, ground and dynamically balanced. The spindle is supported at three-points by high grade precision bearings, two tapered and one ball.
GEARED 16 SPEED HEADSTOCK: Wide selection of fix speeds coupled with a powerful 7.5hp motor to conquer your turning needs. The lathe comes standard with 16 speed selections providing high torque up all the way to 2000 RPM. The electronic control panel is conveniently mounted with ON-OFF power indicator light, emergency stop push button, coolant pump switch and spindle jogging push button. Channels are designed to provide constant lubrication to spindle bearings.
BED and BASE: One-piece machine floor base is made of solid cast iron. Wide bed design is made of Meehanite casting that is vibration stress relieved. Bed ways are induction hardened to HRC 53 and precision ground. The precision hand scraped bed is designed with a removable gap. The proven LeBlond 2V and flat solid bed structure provides rigidity that assures accuracy and maximum stability.
Standard Equipment:
- Main Drive Motor: 7.5HP
- Electrics: 230V/3Ph/60Hz *other voltages and single phase available
- Lockable Main Disconnect Switch
- Coolant System with Electric Pump
- Chuck Guard with Operator Safety Interlock
- Removable Front Chip Pan
- Full Length Splash Guard
- Safety Red Spindle Brake Pedal
- Halogen Work Light
- Leveling Pads (Qty 6)
- Spindle Center Sleeve: MT6 X MT4 (Qty 1)
- Dead Centers (Qty 2)
- Steady Rest w/Roller Jaws
- Follow Rest w/Roller Jaws
- Telescopic Taper Attachment
- 4-Way Quick Turn Tool Post
- Face Plate 12” D1-6 Direct Mount
- Operation Manual & Parts List
- Tool Box & Tools
- One (1) Year Parts & Service Warranty
Specifications:
| Model | RKL-1560G | |
| CAPACITY | Swing Over Bed | 16.14" |
| Distance Between Centers | 60" | |
| Swing Over Cross-Slide | 10.39" | |
| Swing in Gap | 22.95" | |
| Spindle Nose to Gap (Max) | 6.5" | |
| Cross Slide Travel | 8.6" | |
| Compound/Top Slide Travel | 5.5" | |
| HEADSTOCK | Spindle Nose | D1-6 |
| Spindle Bore | 2.066" | |
| Taper Inside Spindle | MT 6 | |
| 16 Speeds (RPM) | 80-2000 | |
| THREADS | Inch Threads | (45) 2 to 72 TPI |
| Metric Threads | (39) 0.2 to 14 MM | |
| Modular Threads | (18) 0.3 to 3.5 | |
| Diametral Threads | (21) 8 to 44 | |
| FEEDS | Longitudinal Feed | 0.002 to 0.067 IPR |
| Cross Feed | 0.001 to 0.034 IPR | |
| Number of Feed Selections | 45 | |
| TAILSTOCK | Quill Diameter | 2.047" |
| Quill Travel | 6.0" | |
| Quill Inside Taper | MT 4 | |
| ELECTRICS | Spindle Motor & Inverter | 7.5 HP |
| Voltage | Customer to Specify Requirement | |
| Coolant Motor | 1/8 HP | |
| WEIGHT | Approximate Net Weight (lbs) | 3500 |
| MEASUREMENTS | Floor Space Requirement | 55" x 130" |
For more info, visit www.p65warnings.ca.gov.
