Mitutoyo ABSOLUTE Digimatic Indicator ID-C0525ENXB, 1"/25mm, Flat Back - 543-722B-02
Brand: Mitutoyo- SKU:
- 543-722B-02
- ID:
- 89260
| Model | ID-C0525ENXB |
| Range | 1" / 25mm |
| Accuracy | 0.0001" |
| Contact Point | Stem dia 3/8", #4-48 UNF Thread |
| Measuring Force | Less than 1.8N |
| Resolution *Switchable | *0.00005" / 0.001mm |
| Type | ANSI/AGD |
$709.50
Mitutoyo ABSOLUTE Digimatic Indicator ID-C0525ENXB, 1"/25mm, Flat Back - 543-722B-02
ID-C Series 543 - Standard Type
Features:
- This is a multifunction standard indicator that is reliable and easy to use.
- Bidirectional communication e.g. to perform parameter setting from a PC (Digimatic S 1 interface) is possible.
- The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle.
- Excellent visibility with a large digital/analog display.
- Model with 0,5 µm digital step is available.
- Measurements such as simple calculation and peak detection are possible.
- Equipped with a calibration schedule warning function.
- GO/±NG judgement is performed by setting the upper and lower tolerances.
- Display 330° rotatable.
- A function lock protects the display against unauthorised use.
- Similar in size to Series 2 dial indicators
- As compact as standard Series 2 dial indicators
- Large, easy-to-read LCD
- GO/±NG judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/±NG) can be displayed in full-size characters.
- The positive/negative count resulting from the spindle's up/down movement can be toggled
- Internal calculations using the simple formula of [F(x)=Ax)] are available
- Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle "Absolute Position" from the origin at power-on. Also unlimited response speed eliminates over-speed errors.
- The ID-C indicator face can be rotated 330° to an appropriate angle for easy reading
- With SPC data output
View more Information & Specifications
Specifications:
| Digital/Analog | Digital |
| Inch-Metric | Inch/Metric |
| Range | 1"/25.4 mm |
| Digital step | 0.00002"/0.00005"/0.0001"/0.0005" 0.0005 mm/0.001 mm/0.01 mm |
| Max. Permissible Error E MPE (Total Range) |
±0.00012"/0.003 mm |
| H MPE (Hysteresis) | 0.00008"/0.002 mm |
| R MPE (Repeatability) | 0.00008"/0.002 mm |
| Measuring force MPL | ≤1.8 N |
| Protection | IP42 |
| Type | ASME/ANSI/AGD Standard |
| Data output | Yes |
| Display | LCD, character height 11 mm, 330° rotatable |
| Max. response speed | Unlimited |
| Measurement frequency (MAX/MIN/RANGE) | 50 times/s |
| Alarm | Low voltage, setting errors, sensor error, display overflow a.s.o. |
| Stem ∅ | 9.52 mm |
| Contact point | Carbide ball, thread: No.4-48UNF |
| Power supply | 1 battery CR2032 |
| Battery life | Approx. 2700 hours (continuous use) |
| Digital Scale | Electrostatic capacitance type absolute linear encoder |
| ON/OFF | Yes |
| ABS / INC (INC ZERO) | Yes |
| Function lock | Yes |
| GO/±NG judgement | Yes |
| DATA/HOLD | Yes |
| Auto Power OFF setting | Yes |
| Counting direction switchable | Yes |
| Customizing keys | Yes |
| Calibration warning function | Yes |
| Low voltage alarm | Yes |
| Digital step switchable | Yes |
| Digimatic S1 Bidirectional interface | Yes |
| Analog bar resolution switchable | Yes |
| Inch/Metric switchable | Yes |
| Mass | 195 g |
| Delivered | Including CR2032 battery, battery lid opener, lifting handle, certificate of inspection |
Function:
- Origin-set/Preset, Zeroset, GO/±NG judgment, Counting direction switching, Power ON/OFF, Data output,inch/mm conversion (on inch/metric models only)
- Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error
- Internal calculations using the simple formula of [F(x)=Ax)] are available
See all Mitutoyo ABSOLUTE Digimatic Indicators ID-C Series 543, Standard Type
For more info, visit www.p65warnings.ca.gov.
