Mitutoyo Calculation-Type Digimatic Indicator ID-C, .5"/12.7mm Range - 543-342B-10

Mitutoyo Calculation-Type Digimatic Indicator ID-C, .5"/12.7mm Range - 543-342B-10

• Calculation-Type Digimatic Indicator features both a key lock and parameter lock.
• Fast measurement frequency up to 50 per second.
• An analog bar provides easy-to-read values when scanning for Max, Min and TIR Values.
• Improved parameter setting software makes it even easier to set all of the available parameters and determine and upload the proper coefficients for calculation.
• The integrated calculation formula is useful in a variety of applications (e.g. roll diameter measurement)
• Coefficients A,B and C are freely definable. X = displacement of the plunger
• Analogue bar graph in the display (14 different scales switchable)
• GO/±NG tolerance judgement function
• MAX/MIN/RANGE function to measure peak values
• A fast measurement frequency mode(detection cycle 20 ms or 50 times/s) is selectable to measure in the peak detection mode (MAX/MIN/RANGE) more reliably
• Easy indicator setup via a setup menu
• A USB interface box can be used to set up the indicator from PC via dedicated software

• Max. Permissible Error E MPE (Total Range): ±0.0001"/0.003 mm
• Scale: Electrostatic capacitance type absolute linear encoder
• H MPE (Hysteresis): 0.0001"/0.002 mm
• R MPE (Repeatability): 0.0001"/0.002 mm
• Measuring force MPL: ≤1.5 N
• Protection: IP42
• Type: ASME/ANSI/AGD Standard
• Display: LCD, character height 8 mm, 330° rotatable
• Max. response speed: Unlimited
• Measurement frequency (MAX/MIN/RANGE): Standard mode: 10 times/s fast mode: 50 times/s, (plunger speed max. 50 µm/s for peak measurement)
• Alarm: Low voltage, ABS composition error, overflow error, setting error
• Stem ∅: 9.52 mm
• Contact point: Carbide ball, thread: No.4-48UNF
• Power supply: 1 battery CR2032
• DATA/HOLD: Yes
• PRESET 3x: Yes
• Digimatic data output: Yes
• ON/OFF:Yes
• Analog bar resolution switchable: Yes
• Function lock:Yes
• GO/±NG judgement:Yes
• Fast measurement mode:Yes
• ABS / INC (INC ZERO):Yes
• Selectable resolution:Yes
• Calculation function (with formula):Yes
• Counting direction switchable:Yes
• Inch/Metric switchable:Yes