Omni Mini Bar Puller - MP-001
Brand: OMNI- SKU:
- MP-001
- ID:
- 313719
| Shank Diameter | 0.625" |
| Capacity | 3/16" - 1-1/8" |
| O.D. & Length | 2.250" x 4" |
Omni Mini Bar Puller MP-001
The Omni Puller is either coolant or air activated. The special adaptor can be easily
removed for internally activated applications. The Omni Puller is mounted in two
basic ways:
Internally Activated: Applications are very common and very easy to mount.
Internally activated applications require you to remove the coolant/air adaptor.
You must have a minimum of 15 P.S.I. to activate the unit (maximum 80 P.S.I.).
Externally Activated: Applications are commonly used with a CNC Turret boring
bar holder attachment, or with another style tool holder. These holders must have
coolant access ports. These ports can be connected with an external line to the
threaded hole of the coolant/air adaptor (thread size 1/8" - 27 NPT). Your external
outside coolant system must have a minimum of 15 P.S.I. to actuated the Puller (15
P.S.I. = 107 lbs. clamping force).
For more info, visit www.p65warnings.ca.gov.
