Proxxon Micro Mill FF 230 - 34-108
The MICRO Mill FF 230 is a small, accurate milling system used to mill, drill and countersink steel, cast iron, aluminum, brass and plastic. The headstock swivels through 360°, indicated on a scale. Height is adjustable. One revolution equals 1/32" (1mm) travel, 1 division equals .002" (0,05mm). The quill and headstock may be locked in position, which is essential when milling. The powerful permanent magnet motor drives via a poly-v-belt, yielding high torques, especially at lower speeds.
The machine comes with three collets of 15/64", 5/16" and 25/64" (6, 8 and 10mm). The solid table has a size of 10 5/8" x 3 5/32" (270 x 80mm) and is T-slotted to 15/32" x 15/64" x 13/64" (the MICROMOT norm of 12 x 6 x 5mm).
Technical Data:
| Speeds | 280 - 550 - 870 - 1,200 - 1,500 - 2,200 RPM |
| Table Size | 10 5/8" x 3 5/32" (270 x 80mm) |
| Column Size | Ø 1 3/8" x 15 3/4" long (35 x 400mm) |
| X-Y Travel | 6 11/16" x 2 9/16" (170mm x 65mm) |
| Overall Height | 20" (500mm) |
| Volts | 110 - 120V AC, 60Hz |
| Weight | 41 lb. (17kg) |
Important: For best results when milling, it is recommended to lock the headstock. This is easily done via the FF 230's lock levers.
Click to View Micro Mill with Accessories
For more info, visit www.p65warnings.ca.gov.
