HEAVY DUTY SPINDLE:
The headstock spindle is machined from forged alloy steel. It is hardened, ground and dynamically balanced. Large through hole with convenient D1-6 cam-lock mount. Special attention was given to lubrication channels providing a constant bath of oil to the supporting high grade two precision tapered roller and one precision ball bearing for long life.
VARIABLE SPEED SPINDLE WITH ELECTRONIC CONTROL:
Two headstock gear ranges that supply a high torque in low range (20 to 400 RPM) and in high range (40 to 2500 RPM). The electronic control panel that is mounted above the headstock provides a RPM LED display, ON-OFF power indicator light, speed control knob, emergency stop push button and spindle jogging push button. The electronic infinitely variable speed is controlled by an AC inverter duty motor. A 1/4HP electric pump provides the headstock with forced pressure lubrication.
WIDE BED WITH ONE PIECE BASE:
One-piece machine floor base is made of solid cast iron. Wide bed design is made of Meehanite casting that is vibration stress relieved. Bed ways are induction hardened to HRC 50 and precision ground. Precision hand scraped bed is designed with a removable gap further expanding swing capabilities. The proven LeBlond 2V and flat solid bed structure provides rigidity that assures accuracy and maximum stability. Standard large volume removable chip tray makes for easy chip clean out and disposal.
|CAPACITY||Swing Over Bed||16.1"|
|Distance Between Centers||40"/ 60"|
|Swing Over Carriage||10.3"|
|Swing in Gap||23"|
|Gap Length||7.3″ / 10.8″|
|Cross Slide Travel||8.6"|
|Taper Inside Spindle||MT 6|
|Infinitely Selections Between Range||(RPM): 20 – 2500 Two Ranges|
|THREADS||Inch Threads||(45) 2 to 72 TPI|
|Metric Threads||(39) 0.2 to 14 MM|
|Modular Threads||(18) 0.3 to 3.5|
|Diametral Threads||(21) 8 to 44|
|FEEDS||Longitudinal Feed||0.0015 to 0.04 IPR|
|Cross Feed||0.00075 to 0.02 IPR|
|Number of Feed Selections||45|
|Quill Inside Taper||MT 4|
|ELECTRICS||Spindle Motor & Inverter||7.5 HP|
|Voltage||230V / 3PH/ 60Hz|
|Coolant Motor||1/8 HP|
|WEIGHT||Approximate Net Weight (lbs)||3650|
|MEASUREMENTS||Floor Space Requirement||W x L67″ x 93″ / 112″|
For More LeBLOND 16" Swing Lathes Variable Speed w/Electronic Control Click Here
Satisfaction Guaranteed - If for any reason our products do not meet your expectations, return them. Complete refund or credit will be issued for unused and unmarked items returned within 10 days of receipt. Defective items will be either replaced or repaired.
Price Protection - Penn Tool Co will NOT BE UNDERSOLD. You will not see our advertised products at a lower price or we will refund or credit the difference. All claims must be made within 30 days of purchase. Proof of claim is required.
At Penn Tool Co we work hard to make sure that each time you purchase a tool, you are completely satisfied.To us, complete customer satisfaction means:
*Today’s most Technologically Advanced Tools necessary to meet demanding production and quality control requirements.
*Competitively priced. Penn Tool Co prides itself on keeping our price low without sacrificing quality.
*Prompt courteous service. Our customer service representatives are fully trained. Product knowledge and commitment to customer service guarantees that your order is processed the same day you place it.
Even with customer service and price protection at the top of our complete customer satisfaction list, we know you want more. Our extensive inventory is yet another way to keep you satisfied. Our large selection of inventory lets us fill your order immediately and at a completion rate that is extremely high in our industry.
Look through our website. If you don’t see a tool that you require contact us and Penn Tool Co will be glad to find it for you with our signature low price guarantee.