Servo Power Milling Table Feeds

Brand:   Servo
ID:
93814
callling
Current Stock:
Servo

Servo Power Milling Table Feeds

  • Higher Torque than competitive models.
  • Controlled feed rate.
  • Smooth finish, regulated control eliminates most second finish cuts.
  • Automatic shutoff at the end of a cut with electric limit switches.
  • Superior thermal characteristics for higher loading.
  • Easy installation with mounting hardware kits for more than seventy mills.
  • Trouble-free performance, lightweight motor minimizes table deflection problems; safety clutch with limit switch design eliminates damage to lead screw or feeds if a hard stop is encountered.


Specifications:

Semi-automated machining on Class 1 mills to 3 hp.
Helical gearing and torque limiting friction safety clutch with new and improved gear.
Peak Torque
(half-wave series motor)
to 140 in.- lb. / 15.8 NM torque
Intermittent Torque 105 in.- lb. / 11.9 NM
Continuous Torque 90 in.- lb. / 10.2 NM
Variable Feed Rate .75-25 IPM / 19-635 mm/min (table & cross)
.5-12 IPM / 13-305 mm/min (knee)
Rapid Traverse 35 IPM / 889 mm/min (table & cross)
12 IPM / 305 mm/min (knee)
Gear Reduction Ratio
(motor to screw shaft)
72:01:00
Electrical 110V, 50/60 Hz, 2.5A.
Approx. weight 15 lbs. / 6.8 kg.

Warning Icon

WARNING: This Product Can Expose You To Materials And/Or Chemicals Which Are Known To The State Of California To Cause Cancer And/Or Reproductive Harm.

Servo Power Milling Table Feeds

Servo Power Milling Table Feeds

Servo Power Milling Table Feeds