Sharp Industries 22" Precision Lathe 2240B
4.5" Spindle Bore
- The “B” models are equipped with D1-11 camlock spindle, 4.5” spindle bore.
- The spindle is mounted on 2 precision tapered roller bearings and one ball bearing. This triple bearing support system ensure accuracy and rigidity at all times.
- Handles that are used for engaging gears are built with locking pins to prevent the handles from being knocked out of place accidentally or under heavy cutting circumstances. Pulling the spring-loaded handle back and then shift does repositioning of handles.
- The universal gearbox design allows easy selection of inch and metric threading by just turning the lever to the assigned position instead of changing individual gears outside the headstock.
- A rotational style lever that results in less movement of the gears compare with the back-and-forth shifting style lever does selection of gears at the gearbox. Less movement of the gears means less wear and greater accuracy.
- The gapped bed design allows extra large work piece to be chucked at the spindle when the gap is taken out.
- Bed ways are induction hardened and ground for durability.
- Headstock gears are hardened and ground, made out of Chrom-Moly alloy steel for maximum wear.
- The headstock is equipped with a job button that allows inching movement of the spindle for easy engagement of gears.
- One shot lube system is installed in the apron to direct lube oil to all the sliding surfaces.
Standard Equipment:
- 4-Jaw 16" Chuck.
- Coolant System
- 4 Way Tool Post
- Halogen Work Light
- Face Plate 20"
- Steady Rest 12" (3.2" - 10.6")
- 4-Way Carriage Stop
- Splash Guard
- 16" Chuck Guard
- Tailstock
- Follow Rest (0.79" – 3.94")
- Wired 220V or 440V. Please Specify
- Tool Kit: Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip Screw Driver, Flat Head Screw Driver, Oil can, Grease Gun, Rear Way Cover Bracket, 2 sets of dear center, Pin for Indicator, and Can of Paint
Features:
- D1-11 Camlock
- 4.5" Spindle Bore
- Direct Selection For Inch/Metric Threads
- One Piece Cast Meehanite Bed
- Quick Change Gearbox
- 15 HP Motor
- 12-Speed Gear Head (10-1,000 RPM)
Specifications:
| Capacity | |
| Swing Over Bed | 22" |
| Swing Over Cross Slide | 13.2" |
| Center Height | 11" |
| Swing Over Gap | 31" |
| Distance Between Centers | 40" |
| Headstock | |
| Spindle Nose Type | D1-11 Camlock |
| Spindle Bore | 4.5" |
| Spindle Speeds (12) | 10-1,000 rpm |
| Taper of Spindle Bore | MT#7 |
| Taper of Center | MT#5 |
| Threads and Feeds | |
| Longitudinal Feeds – in/rev (18) | 0.0022 - 0.032" |
| Cross Feeds – in / rev {#} | 0.00026 –0.035" {17} |
| Inch Threads (#) | 2-56 tpi {44} |
| Metric and Module Threads {#} | 0.5-14mm {24} |
| D.P. Threads (36) | 4-56 mm |
| Leadscrew Pitch, Diameter | 4 tpi, 1-1/2" |
| Carriage | |
| Cross Slide Travel | 14.75"" |
| Compound Rest Travel | 8" |
| Compound Width | 6" |
| Bed | |
| Bed Width | 15-3/4" |
| Bed Length | |
| Tailstock | |
| Quill Travel (graduated) | 6-1/2" |
| Quill Diameter | 3" |
| Quill Taper | MT#5 |
| General | |
| Spindle Motor (220V or 440V, 60, 3) | 15 hp |
| Net Weight (approx.) | 5280 LBS |
| Dimensions ( L x W x H) | 85" x 41" x 50" |
| Standard Color | Gray |
| Electrical | |
| Voltage | 220 or 440 |
| Phase | 3 phase |
| Total Power Consumptions | |
| 230V | 16KVA/45 amps |
| 460V | 16VA/22.5 amps |
