Simatec Simatherm Induction Heater IH 070, 115V - IH-070-115V
Brand: Simatec- SKU:
- IH-070-115V
- ID:
- 336780
Simatec Simatherm Induction Heater IH 070, 115V
for heating smaller to medium-sized rolling bearings up to 80 kg
The IH 070 is intended to heat smaller to medium-sized work pieces up to 80 kg. The IH 070 comes equipped with 3 yokes and can be outfitted with an optional swivel arm.
Due to the external induction coil the device exemplifies efficiency. The performance can be adjusted to four different levels according to the user’s requirements.
Features:
- For rolling bearings weighing up to 120kg (265lb)
- For workpieces with inner diameter of 20 to 400mm (0.8 to 15.7in)
- Also included: 3 yokes, 1 temperature probe, 1 pair of protective gloves
- Available for voltages of 100, 115 and 230V
- Swivel arm available as an option
About Simatherm Induction Heaters:
The best way to avoid unwanted stresses when assembling interference-fit parts is to heat the outer part just enough to produce a temporary clearance. Simatherm induction heaters allow this to be done precisely, evenly, quickly and efficiently. Other methods of heating are slower, less controlled and can cause more harm than good to bearings.
Advantages:
- Precise, even, quick heating
- There is no risk of damage (from excessive mechanical stress, open flames, dirty oil baths, excessively hot ovens and plates)
- Automatic demagnetization
- User friendly
- Increased operational safety
- Selectable power reduction for heating up smaller parts
Click to View More Information
Specifications:
Type | IH 070 |
Description | Induction heater for small to medium workpieces |
Designation | IH 070/230 V (Art. 110.1301) IH 070/115 V (Art. 110.1302) IH 070/100 V (Art. 110.1303) |
Voltage | 220-240 V 110-120 V 100 V |
Frequency | 50-60 Hz 50-60 Hz 50-60 Hz |
max. Amperage | 16 A 20 A 15 A |
Power | 3.7 kVA 2.2-2.4 kVA 1.5 kVA |
Max. weight of rolling bearing | 120kg (265 lbs.) |
Bore diameter | 20-400 mm (0.8-15.7 in) |
Temperature range | 20-250 °C (68-482°F) |
Magnetic probe | Yes, type K |
Accuracy (electronic) | ± 3 °C (37.4°F) |
Range of time control | 0-60 minutes |
Time setting in steps | 0.1 minutes |
Maximum temperature (approx.) | 400 °C (752°F) |
Variable power level | 5 levels: 20-40-60-80-100% |
Automatic demagnetization | Yes |
Residual magnetism | < 2A/0.4in |
Coil diameter | 115 mm (4,6 in) |
Size of operating area (W x H) | 145 x 205mm (5,7 x 8,1 in) |
Dimensions (L x W x H) | 420 x 280 x 345 mm (16.5" x 11" x 13.6") |
Overall weight | 35 kg (77.2 lbs.) |
Number of standard yokes | 3 |
Standard yokes | 2.2 x 2.2 x 10.8in for bearings with a bore diameter of at least 3.1 in 1.1 x 1.1 x 10.8in for bearings with a bore diameter of at least 1.6in 0.6 x 0.6 x 10.8in for bearings with a bore diameter of at least 0.8 in |
Core cross section | 55 x 55 mm (2.2 x 2.2 in) |
Movable yoke | Optional (swivel arm) Art. 190.1302 |
Cooling fan | - |
See all versions of the Simatec Simatherm Induction Heater IH 070
For more info, visit www.p65warnings.ca.gov.