Suburban Sine System Magnetic Compound Sine Plates
Brand: Suburban Tool Inc.-Taft Peirce Metrology- ID:
- 94363
Suburban Sine System Magnetic Compound Sine Plates
- Permanent, ceramic magnetic chucks for superior holding power never lose their strength.
- Same outstanding features as described under the Bolt-On Permanent Magnetic Chucks.
- 0 - 60° capacity.
- Minute angle step 0.200" built into the gage block roll — eliminates steps in base plate.
- Two hardened and ground side rails and one locking strap included in all sine system models.
- Large hinge pins for extra strength.
- One back rail, one end rail plus 4 mounting bolts included.
- On all sine system models identified 0, 1 and 2, the magnetic chuck can conveniently be removed and replaced offering individual use of the sine plate as well as the magnetic parallel chuck.
- D.O.T. Regulated. Shipped via ground freight only.
Specifications:
| Standard Pole - For Holding Large and Thick Work Pieces | |||
| Item Number | 77-273-1 | 77-274-9 | 77-277-2 |
| Manufacturer Part Number | MSPC66S1 | MSPC612S2 | MSPC1212S2 |
| Sine System | 1 | 2 | 2 |
| Width x Length x Height | 6" x 6" x 5-3/4" | 6" x 12" x 6-13/16" | 12" x 12" x 6-13/16" |
| Center Distance of Rolls | 5" within 0.0002" | 5" & 10"/0.0002" | 10" within 0.0002" |
| Parallelism & Squareness | 0.0002" | 0.0003" | 0.0003" |
| Weight | 48 lbs. | 113 lbs. | 237 lbs. |
| Fine Pole - For Holding Small and Thin Work Pieces | |||
| Item Number | 77-291-3 | 77-293-9 | 77-294-7 |
| Manufacturer Part Number | MSPC44FPS0 | MSPC66FPS1 | MSPC612FPS2 |
| Sine System | 0 | 1 | 2 |
| Width x Length x Height | 4" x 4" x 5-3/4" | 6" x 6" x 5-3/4" | 6" x 12" x 6-13/16" |
| Center Distance of Rolls | 3" within 0.0002" | 5" within 0.0002" | 5" & 10"/0.0002" |
| Parallelism & Squareness | 0.0002" | 0.0002" | 0.0003" |
| Weight | 25 lbs. | 52 lbs. | 118 lbs. |
| Fine Pole - For Holding Small and Thin Work Pieces | |||
| Item Number | 77-295-4 | 77-296-2 | 77-297-0 |
| Manufacturer Part Number | MSPC618FPS2 | MSPC812FPS2 | MSPC1212FPS2 |
| Sine System | 2 | 2 | 2 |
| Width x Length x Height | 6" x 18" x 8" | 8" x 12" x 6-13/16" | 12" x 12" x 6-13/16" |
| Center Distance of Rolls | 5" & 15"/0.0003" | 5" & 10"/0.0002" | 10" within 0.0002" |
| Parallelism & Squareness | 0.0004" | 0.0003" | 0.0003" |
| Weight | 204 lbs. | 156 lbs. | 243 lbs. |
For more info, visit www.p65warnings.ca.gov.
