Suburban Sine Vises
- Provides a quick and accurate means of holding a workpiece at an angle for grinding or inspection.
- Angled center channel provides extra holding capacity.
- Solid, one-piece body.
- Made from steel, hardened to Rc 58-60.
- Movable jaw pulls into base at 45 to 60° to insure maximum holding power and hold down force, eliminating tilting and lifting.
- Dual 0.200" minute steps built into the gage roll allow setting small angles with standard gage blocks.
- SV-337 models have small horizontal and vertical vees in the movable jaw and a ratchet mechanism with notched pockets and a one-piece drawbar.
- One locking strap included with each sine vise.
- SineSet® models bolt directly to a SineSet® sine plate or compound sine plate of the same series. S1 models also bolt to the AP-664-S1 90° conversion plate.
Specifications:
| SineSet® COMPATIBLE | |||
| MODEL # | SV-337-S1 | SV-411-S2 | SV-612-S2 |
| SineSet® Series | S1 | S2 | S2 |
| L | 7-1/2" | 11" | 12" |
| W | 3" | 4" | 6" |
| H | 3-5/8" | 4-5/8" | 5-1/8" |
| J | 1-5/16" | 1-7/16" | 1-11/16" |
| JAW CAPACITY | 4-3/4" | 7" | 8" |
| C | 5" ±0.0002" | 10" ±0.0002" | 10" ±0.0002" |
| SQUARE & PARALLEL | 0.0002" | 0.0003" | 0.0003" |
| Weight | 16 lbs. | 36 lbs. | 60 lbs. |
| NOT SineSet® COMPATIBLE | |||
| MODEL # | SV-337 | SV-411 | SV-612 |
| L | 7-1/2" | 11" | 12" |
| W | 3" | 4" | 6" |
| H | 3-5/8" | 4-5/8" | 5-1/8" |
| J | 1-5/16" | 1-7/16" | 1-11/16" |
| JAW CAPACITY | 4-3/4" | 7" | 8" |
| C | 5" ±0.0002" | 10" ±0.0002" | 10" ±0.0002" |
| SQUARE & PARALLEL | 0.0002" | 0.0003" | 0.0003" |
| Weight | 16 lbs. | 36 lbs. | 60 lbs. |
For more info, visit www.p65warnings.ca.gov.
