TMX CAT50 End Mill Holder, 7/8" x 6" - 8-110-5205
Brand: TMX- SKU:
- 8-110-5205
- ID:
- 348882
$166.37
TMX CAT50 End Mill Holder, 7/8" x 6" - 8-110-5205
Features:
- No. of Side Locking Set Screws: 2
- Flange Screws: M5 x .8 x 5mm long = 8-815-185
- Balanced and certified to 15,000 RPM/G6.3
- TMX DIN AD/B design as standard. AD is coolant through the spindle; B is coolant through the flange
- Will accommodate single and double ended end mills
- Low harmonic vibration increases tool life and improves surface finish
- Machined and shot blast exterior for surface integrity
Dimensional Information:
- AT3 taper accuracy for excellent holder / spindle engagement
- Draw bar thread for CAT 50 = 1" -8
- ANSI B5.50-1994
- H5 inside diameter tolerance
- Maximum run out is .0002”(.005mm) TIR for concentric machining
| Item No. | 8-110-5205 |
| ID D1 | 7/8" |
| Gage Length L1 | 6" |
| Major Dia. D2 | 1.88" |
| Locking Screw 1 L2 | .65" |
| Locking Screw 2 L3 | .81 |
| Coolant Through Type | AD/B |
| Socket Set Screw Size | 5/8-18 x 9/16 |
For More TMX CAT50 End Mill Holders Click Here
For more info, visit www.p65warnings.ca.gov.
