Victor 1700T Series Precision Heavy Duty Lathes
Brand: Victor Machinery Solutions, Inc.- ID:
- 355898
Victor 1700T Series Precision Heavy Duty Lathes
High performance lathe with 17" swing over bed and option up to 80" between centers. The lathe is built to last with high quality construction for most demanding applications
Features:
- Hardened and ground chromium molybdenum steel gears in headstock
- Hardened and ground bedways at Rockwell 55°
- The spindle is supported at 3 points by precision bearings
- Universal gearbox provides inch/metric threading without changing gears
- Mechanical overload safety device in the carriage
- Rigid one-piece Meehanite casting base
- Low voltage controls for safety operation
Standard Accessories:
- Removable gap
- Tailstock
- Coolant system
- Chuck cover with limit switch
- Full length foot brake
- D.P. / module thread change gears
- Threading dial indicator
- Center sleeve
- Leveling screws and pads
- Manual and parts list
| Swing over bed | 17" |
| Swing over cross slide | 9.63" |
| Swing over gap | 26" |
| Bed width | 11-3/4" |
| Spindle bore diameter | 2.28" |
| Spindle bore taper | M.T. #6 |
| Taper of center in sleeve | M.T. #4 |
| Spindle nose | D1-6 |
| Number of spindle speeds | 12 Steps |
| Range of spindle speeds | 50 ~ 1,800 rpm |
| Speed selections | 50, 72, 101, 147, 175, 253, 355, 515, 612, 885, 1239, 1800 |
| Range of longitudinal feeds | 0.002" ~ 0.028"/rev. |
| Range of cross feeds | 0.001" ~ 0.014"/rev. |
| Inch threads | 4 ~ 56 TPI x 36 kinds |
| Metric threads | 0.5 ~ 7 mm x 22 kinds |
| Cross slide travel | 8-5/8" |
| Compound slide travel | 7" |
| Tailstock taper center | M.T. #4 |
| Tailstock quill travel | 6" |
| Main motor | 7.5 HP 3 Phase |
| Coolant pump | 1/8 HP |
For more info, visit www.p65warnings.ca.gov.
