YG-1 Tank Power ASP Powdered Metal Fine Pitch TiAlN Futura Roughing End Mills
Brand: YG-1- ID:
- 471823
YG-1 Tank Power ASP Powdered Metal Fine Pitch TiAlN Futura Roughing End Mills
- Increase in tool life of 2-3 times if run at the same speed as cobalt TiAlN coated.
- In many cases the workpiece finish meets customers' requirements.
- Rough milling on stainless and titanium
- Weldon flat shank.
- Can run at about a 20% faster speed and feed rate yet still have about the same tool life as cobalt TiAlN.
- Shank Style: Weldon Flat Shank
- Cutting Direction: Right Hand.
- Center Cutting.
- Helix Angle: 30°
- Tolerance_Cutting Diameter: +.0030"
- Workpiece Material Range: Steel, Stainless Steel, Non-Ferrous, Cast Iron, Plastics
| Item No. | Shank Diameter | Length of Cut | Overall Length | No. of Flutes |
| 08-193-400 | 3/8" | 5/8" | 2-7/16" | 3 |
| 08-193-408 | 3/8" | 1-1/4" | 3-1/16" | 4 |
| 08-193-401 | 3/8" | 3/4" | 2-1/2" | 4 |
| 08-193-410 | 3/8" | 1-1/2" | 3-1/8" | 4 |
| 08-193-411 | 1/2" | 1/2" | 2-1/2" | 3 |
| 08-193-402 | 1/2" | 1-1/4" | 3-1/4" | 4 |
| 08-193-412 | 1/2" | 2" | 4" | 4 |
| 08-193-403 | 5/8" | 1-5/8" | 3-3/4" | 4 |
| 08-193-404 | 3/4" | 1-5/8" | 3-7/8" | 4 |
| 08-193-405 | 3/4" | 1-7/8" | 4-1/8" | 5 |
| 08-193-406 | 1" | 2" | 4-1/2" | 5 |
For more info, visit www.p65warnings.ca.gov.
