Mahr/Federal Millimar Inductive Measuring Probe P2004 A - 5323023
Brand: Mahr- SKU:
- 5323023
- ID:
- 116840
| Series | P2004 A |
| Compatibility | Marposs (Blue) |
| Range | -2mm to 2mm |
| Lifter | Vacuum Lifter |
$799.95
Mahr/Federal Millimar Inductive Measuring Probe P2004 A - 5323023
Millimar P2004 A Inductive Probes
- Models with or without a compressed air (pneumatic) lifter or with vacuum retraction
- Measuring pin mounted in ball-bearing guide
- High linearity over the entire measuring range
- Excellent electromagnetic shielding (EMC)
- All probes can be easily converted from axial to radial by mounting a slip on cap, included in the scope of supply
P2004 A Specifications:
| Item Number | 5323020 | 5323021 | 5323023 | 5323024 |
| Compatibility | Mahr-VLDT | Tesa | Marposs | Federal |
| Measuring range from | -2 mm | |||
| Measuring range up to | 2 mm | |||
| Distance of lower stop MIN | -2.2 mm | |||
| Distance of lower stop MAX | 0 mm | |||
| Distance of upper stop MIN | 2.2 mm | |||
| Distance of upper stop MAX | 4.4 mm | |||
| Lifter / retraction | Vacuum Lifter | |||
| Measuring force | 0,75 N +/- 0,15 N | |||
| Increase in measuring force | 0,2 N/mm | |||
| Sensitivity deviation | 0.3 % | |||
| Repeatability fw (µm) | 0.1 µm | |||
| Hysteresis fu (µm) | 0.5 µm | |||
| Linearity deviation within +/- 0,5 mm | 0.4 µm | |||
| Linearity deviation within +/- 1,0 mm | 1.5 µm | |||
| Linearity deviation within +/- 2,0 mm | 3 µm | |||
| IP protection category | IP 64 | |||
| Cable length | 2.5 m | |||
| Working temperature | 20 °C | |||
| Working temperature MIN | 10 °C | |||
| Working temperature MAX | 55 °C | |||
| Operating temperature Min | -10 °C | |||
| Operating temperature Max | 80 °C | |||
| Temperature coefficient | 0.15 µm/°C | |||
For more info, visit www.p65warnings.ca.gov.
