Mitutoyo Borematic Series 568 Absolute Digimatic Snap-Open Bore Gage, 0.350 - 0.425" - 568-462

Brand:   Mitutoyo
SKU:
568-462
ID:
102828
Model SBM-.425"C
Range 0.350 - 0.425" / 8.89 - 10.795mm
Accuracy ±0.00025"
Head Assy Order No. 04AZB140
Mass (g) 485
callling
$1,600.00
Current Stock:
Adding to cart… The item has been added

Mitutoyo

Mitutoyo Borematic Series 568, Absolute Digimatic
Snap-Open Bore Gage, 0.350 - 0.425" - 568-462


The Borematic enables the operator to take measurements more accurately and more quickly than ever before. Once the origin point is set with the ORIGIN button, the Borematic retains the setting for the entire battery life. Therefore no longer repeated origin setting (presetting) is necessary.


This is a three-point Digimatic snap open bore gauge. The Absolute Borematic offers you the following benefits:

  • It enables you to take measurements easily and quickly.
  • Titanium-coated measuring pins gives you excellent durability and impact resistance.
  • A large LCD display with character height of 11mm makes measurements easy to read.
  • 330° rotatable display unit also gives you easy reading at any angle.
  • GO/NG tolerance judgement function.
  • It has a function lock to protect the setup against unauthorised use.


Features:

  • TiN-coated measuring contact points provide excellent durability and impact resistance and allow the instrument to measure right to the bottom of a blind hole.
  • Large LCD digits of 8.5mm height for error-free reading.
  • 330-degree rotatable display unit for easy reading at any angle.
  • GO/NO-GO judgment function.
  • The ABSOLUTE linear encoder eliminates the fear of over-speed errors.
  • With SPC data output.
  • Setting rings for origin point setting are optional.
  • Can measure deep holes by attaching an optional extension rod.
  • Measurement can be taken closer to the bottom of a blind bore.
  • Supplied in fitted wooden case.


Technical Data:

  • Accuracy: Refer to the list of specifications below
  • Resolution: 0.001mm or .00005"/0.001mm
  • Contact point: Carbide or titanium coating* (*over 12mm/.5" models)
  • Measuring method: Three-point method
  • Display: LCD
  • Battery: SR44 (1 pc.) (938882)
  • Battery life: Approx. 7,000 hours


Functions:

  • Zero-Set, presetting, GO/NO-GO judgment, power on/off, inch/mm conversion (inch/mm type only), SPC data output, data hold


Optional Accessories:

  • 905338: SPC cable (1m / 40")
  • 905409: SPC cable (2m / 80")
  • 952322: Extension rod 100mm / 3.94" For range 6-12mm / .275-.5" models
  • 952621: Extension rod 150mm / 5.9" For range 12-20mm / .5" - .8" models
  • 952622: Extension rod 150mm / 5.9" For range 20-50mm / .8" - 2" models
  • 952623: Extension rod 150mm / 5.9" For range 50-300mm / 2"-12" models


Specifications:

Range 0.35 - 0.425 inch
Mass 485 g
Accuracy 6-20 mm : ±5 µm
20-125 mm : ±6 µm (excluding quantizing error)
Digital step 0,001 mm
Measuring pins Titanium coated tungsten carbide (6 - 12 mm)
Titanium coated hardened steel (12 - 125 mm)
Battery life approx. 5000 hours
Display LCD, character height: 11 mm
Delivered Including box, key, 1 battery,
certificate of inspection
ZERO/ABS Yes
GO/±NG judgement Yes
ON/OFF Yes
DATA/HOLD Yes
2 x PRESET Yes
Function lock Yes
Data output Yes
Digital/Analog Digital
PRESET (preselection) Yes
Inch-Metric Inch/Metric
GO/±NG judgement on LCD Yes
DATA / HOLD (Holding value) function Yes



See all Mitutoyo Borematic Series 568 Absolute Digimatic Snap-Open Bore Gages


Warning Icon

WARNING: This Product Can Expose You To Materials And/Or Chemicals Which Are Known To The State Of California To Cause Cancer And/Or Reproductive Harm.

Mitutoyo Borematic Series 568 Absolute Digimatic Snap-Open Bore Gage, 0.350 - 0.425" - 568-462

Mitutoyo Borematic Series 568 Absolute Digimatic Snap-Open Bore Gage, 0.350 - 0.…

Mitutoyo Borematic Series 568 Absolute Digimatic Snap-Open B…

$1,600.00