Suburban 18-1/4" Magna-Sine Magnetic Compound Sine Plate - A-15-MS

Brand:   Suburban Tool Inc.-Taft Peirce Metrology
SKU:
A-15-MS
ID:
326681
L 18-1/4"
W 6-3/4"
H 6-7/8"
C1 15" ±0.0002"
C2 5" ±0.0002"
Square & Parallel 0.0004"
Weight 200 lbs.
$15,495.00
Current Stock:
Adding to cart… The item has been added

Suburban Tool

Suburban 18-1/4" Magna-Sine Magnetic Compound Sine Plate - A-15-MS

  • MAGNA-SINE™ magnetic sine plates are equipped with extremely powerful ceramic magnet chucks. Having stationary magnets in the top plate and a movable magnet core, these chucks provide an average holding power of up to 100 pounds per square inch. This is nearly twice the holding power of a standard chuck!
  • The chucks provide maximum holding of both small & large parts due to a combination fine / standard pole spacing.
  • All but the chuck is made of steel, hardened to Rc 58-60.
  • The swivel block provides full face contact with gage blocks keeping them securely in place.
  • The gage block & hinge rolls are ground and lapped for straightness and roundness.
  • An exclusive locking device inside the hinge roll provides a positive lock with an expanding action. Both screws lock toward the front of the unit, pulling the top plate down on the set-up gage blocks without distortion.
  • The angular accuracy is guaranteed to be within 5 seconds of arc up to 15°, 10 seconds up to 30° and 15 seconds up to 45°.
  • Side and back rails are included.
  • Available hinged as STANDARD (as shown) or OPPOSITE-HAND.
  • Made in U.S.A.

For More Suburban Magna-Sine Magnetic Compound Sine Plates Click Here

Suburban 18-1/4" Magna-Sine Magnetic Compound Sine Plate - A-15-MS

Suburban 18-1/4" Magna-Sine Magnetic Compound Sine Plate - A-15-MS

Suburban 18-1/4" Magna-Sine Magnetic Compound Sine Plate - A…

$15,495.00