Baileigh BP-3360NC Hydraulic Press Brake, 33 Ton, 60" Length - BA9-1000803
Brand: Baileigh- SKU:
- BA9-1000803
- ID:
- 101059
$42,399.00
Baileigh BP-3360NC Hydraulic Press Brake, 33 Ton, 60" Length - BA9-1000803
Built with a steel frame, this hydraulic press brake runs smoothly in production and makes crisp bends. We designed this machine for simplicity. You can learn to use it in 5 minutes.
- Produces up to 33 tons of pressure.
- Bends sheet metal up to 61" wide.
- Maximum capacity of .078" thick sheet metal across the machine’s full width.
- 3 hp main motor requires 220-volt 3-phase power.
POWERFUL, EASY-TO-USE HYDRAULIC SYSTEM
- Runs in 3 modes: jog mode for setup, manual mode for more control over descent and return, and automatic mode for full production.
- 2 encoder-controlled hydraulic cylinders move the top beam.
- Digital readout (DRO) displays the position of the downward stroke, so you can fine-tune a bend and make it right every time.
- It takes a just few seconds to change the top beam pressure and the top position of the stroke (for more or less travel).
- You can set a timer for bend delay to hold the beam down at the bottom of the stroke, so the bend keeps its shape.
- 2 hand wheels let you adjust the position of the beam and back gauge for consistency across the entire width of the beam.
- Foot pedal brings the stroke up and down, leaving your hands free to position the material.
- Motorized back gauge rides on a solid ball screw trolley mechanism.
- Back gauge encoder shows its position on its own DRO.
- Parallel mechanism on the beam synchronizes the top and bottom die to deliver better quality bends across the entire width of the machine.
RIGID STRUCTURE AND LOW MAINTENANCE
- Heavy electrowelded frame, made of solid plate steel, keeps this press brake accurate and running smoothly in production for many years.
- Rugged 3,300-pound construction supports the hydraulic pressure, so the machine stays strong at full capacity.
- Upper beam rides on a hardened, stabilizing track, coupled together by 3 axes of bearings, to ensure high accuracy between both dies at any position of the stroke.
- Includes a set of hardened single-Vee American tooling.
- Accepts standard press brake tooling, giving you a wide variety of options.
- Comes with front material rests (or support arms), which some competing machines do not include.
- 6-light safety curtain helps protect you from injury. This guard stops the machine from running if your hand passes through the light beam.
- 4 grease zerks let you add oil every few months.
- Large hydraulic reservoir on the back allows for convenient fluid changes every 6 to 8 months.
LIFETIME SERVICE
- Most replacement parts are in stock at Baileigh's Wisconsin headquarters, so we can get them to you quickly.
- Comes covered by a 1-year parts warranty.
- Baileigh provide lifetime technical support by phone from reps who have hands-on machine experience.
Recommended for: Small industrial shops, maintenance and R&D shops, and potentially larger industrial shops, if they need to make a specific part that fits this press brake's width.
Specifications:
Part Number | BP-3360NC |
Stock Number | BA9-1000803 |
Return Speed | 2.36" / sec. |
Maximum Pressure | 33 tons |
Oil Capacity | 24 gal |
Bending Capacity Max Length Max Thickness | 61" / .078" |
Approach Speed | 3.14" / sec. |
Back Gauge Motor | 1/2 hp |
Bending Speed | .275" / sec. |
Main Motor | 3 hp |
Distance Between Housings | 49.21" |
Distance From Table To Ram | 9.84" |
Power | 220V / 3-phase |
Shipping Weight | 3300 lbs |
Shipping Dimensions (Inches) | 83 x 59 x 94 |
For more info, visit www.p65warnings.ca.gov.