Baileigh SH-70250-HD Heavy Duty Hydraulic Sheet Metal Shear, 1/4" x 96" - BA9-1007179

Brand:   Baileigh
Fixed Shipping Cost:
Current Stock:
Adding to cart… The item has been added


Baileigh SH-70250-HD Heavy Duty Hydraulic Sheet Metal Shear, 1/4" x 96" - BA9-1007179

The SH-70250-HD from Baileigh Industrial is a hydraulic shear that cuts ¼” mild steel over its entire 96” length. The frame of the SH-70250-HD is all integrated and fully welded to eliminate vibrations commonly found on other models. By eliminating vibrations, it is eliminating any stress that can occur during the cutting process.

The SH-70250-HD features an NC controller for programming of the back gauge. This programmer is accurate to =/- .01mm and can hold up to 100 programs. Convenient rolling tables mounted on the front of the machine help with loading of materials. Gap is easily adjusted via hand wheels.

Since the SH-70250-HD hydraulic shear is built to last, Baileigh Industrial uses only the best quality components, Schneider electrical, Rexroth hydraulic systems, and NOK seals from Japan.

This NC shear enables fast, precise production runs with a programmable backgauge. The fully welded steel frame on this heavy-duty shear steel frame eliminates vibrations commonly found on other models.

  • 96" length
  • Maximum capacity of 1/4" thick mild steel.
  • 10 hp motor runs on 220-volt 3-phase power.
  • Uses only the best components, like Schneider electrical parts, Rexroth hydraulics, and NOK seals from Japan.
  • Hydraulics are located in the front for simple fluid changes. Just lift the panels using the convenient handles.
  • Squaring arms support the material and keep it square to the blade.
  • Roller infeed tables, mounted on the front, help you load heavy materials.
  • Fully programmable backgauge is accurate to =/- .01mm.
  • Internal memory can hold up to 100 programs.
  • Adjustable blade gap prevents crimping or folding. Just turn the handwheel.
  • You can adjust the raked angle for your material thickness to minimize burr and reduce strain on the hydraulics. Press a button, then pull the lever until the light goes on.
  • Comes standard with shadow line positioner for accurate material placement.
  • Fully welded and integrated steel plate frame eliminates vibrations and stress on the cutting process.
  • This hydraulic sheet metal shear is covered by a 1-year parts warranty.
  • Baileigh stocks blades and other replacement parts, so we can get them to you quickly.
  • Includes lifetime technical support from Baileigh's team of reps, all with hands-on metalworking experience.


Part Number SH-70250-HD
Stock Number BA9-1007179
Max. Material Thickness 1/4"
Max. Thickness (Stainless Steel) .177"
Thickness (mild steel) .250"
Max. Material Thickness (Stainless Steel) .125"
Blade Rake Angle 1.5 Degrees
Blade Clearance Manual Hand Wheel
Back Gauge Length 23.62"
Shear Length 96"
Motor 10 hp
Strokes Per Minute 14 - 45
Power 220V / 3-phase
Shipping Weight 10,525 lbs
Minimum Material Thickness 18ga.
Shipping Dimensions (Inches) 143x80x73 & 69x44x11

Warning Icon

WARNING: This Product Can Expose You To Materials And/Or Chemicals Which Are Known To The State Of California To Cause Cancer And/Or Reproductive Harm.

Baileigh SH-70250-HD Heavy Duty Hydraulic Sheet Metal Shear, 1/4" x 96" - BA9-1007179

Baileigh SH-70250-HD Heavy Duty Hydraulic Sheet Metal Shear, 1/4" x 96" - BA9-10…

Baileigh SH-70250-HD Heavy Duty Hydraulic Sheet Metal Shear,…