Bison Self-Centering Milling Fixture 9417-160 FM US - 7-640-0640
Brand: Bison- SKU:
- 7-640-0640
- ID:
- 972997
Bison Self-Centering Milling Fixture 9417-160 FM US - 7-640-0640
The Bison 9417-160 FM US Self-Centering Milling Fixture is a 160 mm (6-inch) low-profile, four-jaw stationary chuck designed for secure workpiece holding during machining operations. Manufactured by Bison, this fixture combines standard precision construction with a robust cast iron body to provide dependable workholding performance.
Featuring a four-jaw configuration, the Bison 9417 series offers a wide clamping range and long jaw travel, allowing it to accommodate different workpiece sizes. Its low-profile construction provides a compact workholding solution, while the sealed design helps prevent machining chips from entering the fixture mechanism.
The Bison 9417-160 FM US is supplied with one set of hard top jaws, one set of hard master jaws, and one wrench with ratchet, providing the essential accessories for fixture operation.
SPECIFICATIONS
| Brand | Bison |
|---|---|
| Product Name | Self-Centering Milling Fixture |
| Series | 9417 |
| Model | 9417-160 FM US |
| Product Type | Low-Profile 4-Jaw Stationary Chuck |
| Nominal Chuck Size | 160 mm (6 inches) |
| Number of Jaws | 4 |
| Body Material | Cast Iron |
| Precision Classification | Standard Precision |
| Clamping Range | Wide clamping range |
| Jaw Travel | Long jaw travel |
| Construction | Low-profile construction |
| Chip Protection | Sealed against chips |
| Bison Catalog Code | 7-640-0640 |
| Weight | 28 lb (12.7 kg) |
TECHNICAL DIMENSIONS
Refer to the following dimensional specifications for the Bison 9417-160 FM US four-jaw stationary chuck.
| ØA | ØA1 | B | B1 | ØE | F | G | H | J | K | L | M | □S | n × J |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 9.33 | 6.89 | 2.05 | 0.67 | 1.26 | 2.64 | 2.01 | 0.33 | 0.98 | 0.67 | 0.47 | — | 0.35 | 0.16 |
Note: All dimensional values are in inches, as specified in the Bison manufacturer catalog.
KEY FEATURES
- Four-Jaw Configuration: Designed with four jaws for workpiece clamping and positioning.
- Standard Precision: Manufactured as a standard precision chuck for machining applications.
- Cast Iron Body: Features a robust cast iron body construction.
- Wide Clamping Range: Provides a wide clamping range to accommodate different workpiece sizes.
- Long Jaw Travel: Offers extended jaw travel for flexible workpiece clamping.
- Low-Profile Design: Compact construction helps reduce fixture height within the machine setup.
- Sealed Construction: Sealed against chips to help protect the internal fixture mechanism.
STANDARD ACCESSORIES INCLUDED
The Bison 9417-160 FM US includes the following standard accessories:
- 1 set of hard top jaws
- 1 set of hard master jaws
- 1 wrench + ratchet
APPLICATIONS
The Bison 9417-160 FM US is designed for workholding applications requiring a low-profile, four-jaw stationary chuck. Its wide clamping range and long jaw travel make it suitable for holding different workpiece sizes during machining operations.
- Workpiece holding during milling operations.
- Four-jaw workholding applications.
- Machining setups requiring a low-profile stationary chuck.
- Applications requiring a wide clamping range and long jaw travel.
SAFETY AND OPERATING INSTRUCTIONS
- Ensure the fixture is securely mounted before beginning machining operations.
- Check that the workpiece is properly positioned and clamped before operating the machine.
- Inspect the jaws and clamping components for wear or damage before use.
- Keep the fixture clean and maintain its sealed construction.
- Use the supplied wrench and ratchet for the intended fixture operation.
- Follow the manufacturer's installation, maintenance and operating instructions.
FREQUENTLY ASKED QUESTIONS
What is the Bison 9417-160 FM US?
The Bison 9417-160 FM US is a 160 mm (6-inch) low-profile, four-jaw stationary chuck designed for workpiece holding during machining operations.
How many jaws does the Bison 9417-160 FM US have?
This model features a four-jaw configuration.
What material is used for the fixture body?
The Bison 9417-160 FM US features a cast iron body.
What precision classification does this chuck offer?
The manufacturer identifies the Bison 9417 series as a standard precision chuck.
What is the nominal size of this model?
The Bison 9417-160 FM US has a nominal size of 160 mm (6 inches).
What are the key features of the Bison 9417 series?
The series features a low-profile design, wide clamping range, long jaw travel, cast iron body and sealed construction to help prevent chips from entering the fixture.
Is the Bison 9417-160 FM US sealed against chips?
Yes. The fixture is sealed against chips to help protect its internal mechanism during machining operations.
What standard accessories are included with this fixture?
The fixture includes one set of hard top jaws, one set of hard master jaws, and one wrench with ratchet.
What is the weight of the Bison 9417-160 FM US?
The manufacturer's catalog specifies a weight of 28 lb (approximately 12.7 kg).
What is the Bison catalog code for this model?
The Bison catalog code for the 9417-160 FM US is 7-640-0640.
What is the difference between the Bison 9417 and 9416 series?
The Bison 9417 is a four-jaw stationary chuck series, whereas the Bison 9416 is a three-jaw stationary chuck series. Both feature low-profile construction.
How do I select the correct Bison 9417 model?
Select the model based on the required nominal chuck size, workpiece dimensions, clamping requirements and available machine setup space. Refer to the individual model's technical dimensions before purchasing.
View All Bison 9417 Self-Centering Milling Fixtures
For more info, visit www.p65warnings.ca.gov.

